Unique Styles

The Diva

2011-11-14T18:40:00.006-05:00

This tutorial was written in PSP 9 and can be used with any other version.
I assume that you have a working knowledge of PSP.

-----------------------
Supplies Needed:
Tube of choice/close up
Template10 by Lori
find her temp HERE
gradient of choice
Fonts of choice
　
Plugins needed are Optional:
penta.com - color dot
penta.com - jeans
photoeffex - scanlines
xero - radiance
alien skin xenofex - constellation
eye candy 4000 - hsb noise
i just don't have that plugin
anymore so i use add noise
lokas software - plastic
or you can use eye candy 4000 - glass
　
　
　
-----------------------
I am using the artwork of Elias Chatoudis
You buy his tubes here PTE
-----------------------

Let's open her template, i took off the top left and bottom squares, delete them. also took off the white background. now let's open a close up tube of choice, select the black circle then selections all> float> defloat> now copy and paste as new layer of your close up tube place where you want now selections invert>delete select none.

　
　
adjust>hue and saturation>colorize make sure the dials are both at zero to turn black & white, now lower opacity down to 30 or to your liking, now we're going to open our plugin xero - radiance apply settings of your choice, now closeout of all your layers aside from the black circle, tube layer merge these now let's open penta.com - jeans, settings of choice, then open alien skin - constellation also settings of choice.
　

unhide all of our layers, click on middle frame let's open our lokas - plastic settings of choice, but click on the color section next to color overlay (should be black click on it) and select a color of choice i used purple now let's open photoeffex - scanlines now use settings of choice on your frame, now select your colored frame, selections all float>defloat> modify> expand by 2 now add new raster layer, flood fill color of choice, i used white select none now drag your white frame under your middle frame, so there is a thing white on the outside, now add noise then drop shadow close out all layers besides your noise, frame, black circle layer now merge and unhide everything else.

now do the same with your top and bottom trio layer, the same steps as your middle frame when you get done with that close out of all layers but your noise frames for the trio frames and trio frames now merge and unhide rest of the layers.
　
　

select your bottom inner circle trio frames, selections all float>defloat add a new raster layer and flood fill gradient of choice select none and do the same with the top trio inner circles, (delete the template circles) i then copy and pasted my two tube faces in the little circles you can use whatever part of the tube you'd like, by selecting your gradient circles selections all float>defloat> paste your tube as new layer invert>delete, do this for each circle, changing the blend mode for each tube layer to either overlay or screen, while adding xero - radiance to each tube setting of choice hide all layers once more then merge your tube layer, gradient circles then add penta.com - color dot settings of choice.

　
Now let's add your main tube i used the oppisite tube i used inside the big circle, hide behind your trio frames, add drop shadow, xero - radiance to your tube if you'd like... now resize if needed i just merge everything cut and paste as a new image and it makes the tag smaller now add your copryights, your quote if you want any then add your name save as a PNG and now you're done.. i hope i didn't confuse you much if so if you have any questions feel free to leave so in a comment or in my chat box and i'll try to get back to you soon and help you out.
　　
　
　
Thanks for trying my tutorial.
Now lets see those results,
I hope you have enjoyed this tutorial!
　
　
　
-----------------------
This tutorial was written on November 14th, 2011 by Melissa.
In no way may this tutorial be copied to another
website without the creators permission. Any resemblance
to this tutorial is purely coincidental.

Island Beach

2011-09-03T21:07:00.004-04:00

This tutorial was written in PSP 9 and can be used with any other version.
I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:
Tube of choice/close up
Awesome FTU scrapkit by
Melissa at her blog HERE
Template416 by Missy get
her template at her blog HERE
Font of choice

Plugins needed are Optional:
photo effex - scanlines
xero - radiance

-----------------------

I am using the artwork of Keith Garvey
You buy his tubes here PTE

-----------------------

Let's open her template, i took some pieces off, but i left the 2 front circles, the 2 back squares and the middle square, get rid of the rest if you want, close out of the rest of your layers besides the 2 squares in the back. go and open your elements and papers then go open your tube. I used the glittery paper for both squares but as you can see it's different colors i used the top of the paper the orange on the left square then select>select all>float>defloat> copy paper and paste paper then invert>delete, select none. get rid of the template square. do the same for the other square but flip the glitter paper so its pink, then selections>all float>defloat copy and paste paper, then invert>delete, select none. get rid of the template square.

now i merged, then selection all float>defloat> modify>expand by 2 or 3 which ever you like, invert> add a new raster layer flood fill color of choice i used greenish, select none, drag below your paper layer, add noise then drop down shadow now merge these. let's open the middle square back up selections all float>defloat> invert, copy and paste the paper with the faded circles on them with the gradient, invert>delete select none.

now open your tube use a close up if you have one or just the tube itself place where you want it now invert> go to each tube layer you copied and pasted into the square and hit delete on your keyboard, gets rid of the excess tube, now select none. mess with your blend mode to which ever suits you best i think i used overlay then switched the tube b&w adjust> hue & saturation>colorize to black and white move the dial all the way to Zero.

now on the outer frame add noise then drop down shadow to frame, close out of your square layer merge the middle square layer now hide that too, so the square layers should all be hidden, by clicking the "eye" on the layers palette on the right hand bottom corner, now i want you to open the 2 circles on the left and right, merge them together selections all>float defloat> copy and paste tube of choice place where you want inside the circle while the matching ants are around the circles, now on each of your tube layers hit delete on your keyboard, now select none. now switch to black and white, lower opacity to your liking now go to your plugins photo effex> scanlines settings of choice, if you don't have this filter you can use texture effects> blinds.

now time for the best part adding your elements resze them down if needed and just place them where you want on the tag i used the coconut drink, polaride picture, the banjo, grass, beach sign, and the folor circles, i placed it over the circle frame, i then used my deformed tool to make it fit perfectly around the circles, do this for each then add drop shadow and merge the circles, tubes and flower circles together, you should now at this point unnhide all of your other layers.

i also placed the grass area behind the circles and my main tube but not behind the middle square, add drop shadows to all elements, add your main tube i added plugins radiance to it settings of choice you don't have to do this though. resize the tag itself if needed now add your copyrights, add your name and save as a png and you’re done!

Thanks for trying my tutorial.
Now lets see those results,
I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on September 3rd, 2011 by Melissa.
In no way may this tutorial be copied to another
website without the creators permission. Any resemblance
to this tutorial is purely coincidental.

New Templates

2011-06-17T17:09:00.006-04:00

Here are some new templates i made last night for a challenge i did, i hope you enjoy them. You can see the tags made with them and download templates below.

Tag i made with the template.

Please leave some love.
Download

Tag i made with the template.

Please leave some love.
Download

Click on the tags and template previews for the full sizes having size issues with my blog

My First Cluster

2011-05-30T18:49:00.009-04:00

Here is a freebie cluster frame, i made with Kristin & Kaci's Collab freebie Emo Babe which you can find this freebie kit on both of their blogs

Kaci & Kristin

Cluster Frame

Download

Here is a tag i've made with this cluster. Please leave some love on my blog if you snag my cluster frame, and at their blogs if you snag their scrapkit. Click on the tags to make them bigger my blog is messing up and won't show the larger tag for some reason

Falling Leaves

2011-04-22T02:40:00.008-04:00

sorry had to make it small it kept cutting off it's not even that big of a tag grrr lol

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:
Tube of choice/close up
Awesome cluster frame by
Sarah at SaraPlays
Fonts & Mask of choice
I used WSL_Mask38
Weescotslass
Fall leaf floates of choice

Plugins needed are Optional:
xero - radiance
eye candy 4000 - HSB noise

-----------------------

I am using the artwork of Elias Chatzoudis
You buy his tubes here PTE

-----------------------

let's open the frame, resize down to 15% open a 550x550 canvas copy and paste your frame on your canvas, open your tube of choice decide where the frame is gonna look from behind your tube, give you tube a drop down shadow, use your magic wand tool, with your cluster frame layer clicked, click the inside of each frame, selections all>float>defloat>expand by 5 use your dropper tool and use a color of choice from your tube and add a new raster layer and flood fill your selection. selections none, drag your paper layer below your frame.

Now select your flood fill layer selections all>float>defloat> now use a close up tube of choice copy and paste your tube inside the marching ants, selections invert>hit delete, selections none. now drag your tube layer below your frame, change blend mode to overlay, select your tube layer change to black and white, adjust>hue & saturation>colorize make sure all sliders are set to Zero this turns images black and white. this makes the blend mode more intense, now use xero plugin radiance, settings of choice this is optional to use this plugin at all.

Now this is when i merged all of my layers, now add your mask color of choice, now make it to where your mask is on it's own layer, and your merged tag is on it's own. Add your copyrights, and add your name, Using your magic wand tool, settings point to point, not trace all around your leaves, now use your HSB noise plugin leave the settings as is and click ok, select none. click on your frame layer now go to adjust>add noise> settings at 60, or which ever number you want, but everytime you go back you need to take away 3 numbers or give 3 more numbers. depending how you want the animation to go. Now right click on your tag tab and hit copy merged, open your animation shop click the inside and hit paste as new animation, now let's go back edit>undo see the little arrow? Well on the top of your tool pallette right under "effects & adjust" You will see curled arrows, hit the one on the left a few times and watch as it undos your mask noise layer, keep going until you see the HSB noise get off your leaves so pay attention, your marching ants should still be around your leaves, now go back into HSB noise and click "random speed" go back and do your mask layer this time since we did 60 first drop down 3 times so you should now have 57, open your animation shop again, right click on your tag paste>after current frame. Now go back and do the last step all over again, but remember on HSB noise you hit random speed once again , and on your mask layer drop down 3 more numbers so it should be at 54, click on your second tag in animation shop paste>after current frame, now add your leaf floaties to your tag now right click again>view animation, save as a gif and you're done.

Now if my way of using animation is too confusing you are welcome to use your own way, i just think the way i do it is quick and easy (atleast in my eyes) since i do it all the time lol.

Thanks for trying my tutorial.
Now lets see those results,
I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on April 22nd, 2011 by Melissa.
In no way may this tutorial be copied to another
website without the creators permission. Any resemblance
to this tutorial is purely coincidental.

Subtle Beauty

2011-04-19T15:33:00.002-04:00

This tutorial is Exclusivly made for The Creative Chicks forum... Here

Beached Mermaid

2011-04-15T00:07:00.004-04:00

This tutorial was written in PSP 9 and can be used with any other version.
I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:
Tube of choice/close up
Awesome cluster frame by
Sarah at PimpMyTags, You need
to scroll down alot, but there is lots
of amazing freebies to collect
while you look for the one i used lol.
Fonts of choice
beach elements of choice.
Plugins needed are Optional:
none

-----------------------

I am using the artwork of Elias Chatzoudis
You buy his tubes here PTE

-----------------------

Quick and easy tutorial.

let's open up the already made cluster, resized to about 80% i think, i added my tube resized it down too i can't remember place where you want it in front of the frame, i then used my magic wand and clicked on the inside of the cluster on the water, keep clicking since the water is different shades, clicked enough so you can copy and paste my tube inside the selective ants, then selections >invert>delete. select none. mess with your blend mode settings and lower opacity. i added my own sand all around the cluster drag below your cluster layer. also added the sea weed, bubbles, star fish and a shell. If you got the tube i used the little crab is also made by elias i placed him on top of the bunched up shells connected to the cluster, give your added on elements, tube, cluster, and crab all drop down shadows. add your copyrights, add your name and save as a png and you’re done!

Thanks for trying my tutorial.
Now lets see those results,
I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on April 15th 2011 by Melissa.
In no way may this tutorial be copied to another
website without the creators permission. Any resemblance
to this tutorial is purely coincidental.

Wild One

2011-03-14T04:02:00.005-04:00

fonts of choice, mask of choice

Plugins Needed Optional:
optikVerve Labs – Virtual Photgrapher
settings hollywood, and halo

-----------------------
I am using the artwork of Elias Chatzoudis, This tube was bought while
he was with MPT, You can buy his tubes now a PTE
-----------------------

Let’s open a new canvas 550x550, open the pink and silver frame, resize at 80% copy and paste frame onto your canvas, use your magic wand, click the inside of your frame, selections all float>defloat>expand by 3 copy and paste your blue paper invert>delete. Select none. Drag paper below frame, do the same thing but this time copy and paste close up of your tube, invert>delete. Select none. Drag tube layer below your frame, now change your blend mode, highlight tube layer, turn tube black and white for deeper effect, selections all, float>defloat now open optikverve labs plugin, click on the drop down menu click on hollywood click ok, now go back into the plugin and pick halo. (selecting the whole tube makes it so the plugin ads the effects to the tube only, without doing this step it leaves a black background around your tube) If you don’t have this plugin, just mess with your blend mode settings and skip plugin effect.

Now let’s open the chrome skull I used the one with the blue ribbon on it’s head, pink bow, resize down if needed and place around the frame, open your main tube place where you want, give a drop down shadow to tube, and your elements. Now let’s open the wordart “wild one” resize if needed place in the front of your tube or behind a leg, open two ribbons, pink and blue, resize if needed, place on the bottom of your wordart, mirror the second ribbon. add your mask, resize tag down if you want, now add your copyrights then add your name save as a PNG and you’re done.

Thanks for trying my tutorial. Now lets see those results, I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on March 14th, 2011 by Melissa.
In no way may this tutorial be copied to another website without the creators
permission. Any resemblance to this tutorial is purely coincidental.

New look 2011

2011-03-12T21:04:00.003-05:00

Woohoo well i got a new layout and header, Going to have to make other things in the blog match like my blinkie boooooo, thinking about posting a few new tuts using some ftu kits, i don't have alot of tutorials where the kits being used are free.

Naughty Student

2010-09-30T19:59:00.006-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Scrapkit by Pimp'd Designz

Find her ptu “Teacher's Pet” kit Here

fonts of choice, Missy’s Temp287

Get this template at her blog Here

Plugins Needed Optional:

Mura’s - copies

-----------------------

I am using the artwork of Elias Chatzoudis

You can buy his tubes at www.mypsptubes.com

-----------------------

Let’s open the template, I got rid of her wordart and copyrights, the frames and small circles. Select the big pink circle on the left selections all float> defloat copy and paste paper of choice, invert>delete select none. Select the rectangle selections all float> defloat copy and paste paper of choice, invert>delete select none. Now do the same for the black circle and the longer rectangle. Now open up your scrap pieces I used the chalk board, crayons, clip, paint splats, ruler, notebook, open book, tape, crayon shavings, paper clip, scicors, now resize these place them around your tag where you want them now add drop shadow, I colorised all my paint splats and crayons.

Now place your chalk board where the frame was grab your text tool and type out “such a naughty student” go to your plugin mura’s copies, now click on your chalk board, use your magic wand click the inside where the black is now with the marching ants around the square, click back on your text layer selections invert>delete. Drag this later below everything but not your chalk board, lower the opacity.

I then used my preset tool set to square, make a square and use your deform tool and move it slightly to the side, selections all float> defloat> modify> expand by 3 add a new raster layer flood fill color of choice, selections none, drag this layer below your preset square add noise, then a drop shadow get your paper clip and place on the side made it look real by deleting some of the paper clip add a drop shadow before you crop it. now click on your preset square selections all float> defloat> copy and paste your tube of choice, invert>delete select none.

Now turn your tube black and white, add drop shadows to your squares now merge these, now resize your main tube down some place on your tag in front of your chalk board so it kinda looks like she wrote the words, add drop shadow now add your name copyrights and you’re done!

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on September 30th, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Princess Of The Sea

2010-09-30T16:30:00.008-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Great PTU scrapkit by Chassity

Find her “Under The Sea” kit Here

fonts of choice, sand of choice

Let’s open a 500x200 canvas, open up all your scrap pieces and your tubes.. I used the pretty little mermaid that came with her scrapkit, you can use any mermaid tube or any tube, now if you don’t have her scrapkit just follow along with different pieces. I opened what looks to be water waves so I resized them down, copied and pasted them on the canvas made sure they went all the way across, I then merged them added a drop shadow and opened up the tube resized it and placed on the left side.. I also added a drop shadow, now add a new reaster layer drag it to the very bottom flood fill color of choice, I choose a light blue. Now click on your tube and duplicate, then go to image>mirror this will flip the tube around, drag below your water layer and duplicate these tubes to make it look like a background, hide all layers besides your mermaid tubes in the background, merge and unhide everything on that layer change blend mode.

Now all you really need to do is open up all the pieces you want to decorate with, I used sea weed, white flower with yellow bead in the middle, bubbles, squirt of water, sea shell, crab, fish, achor, star fish and that’s it, the sand didn’t come with the scrapkit so use your own sand, resize all the scrap pieces down small so you can place them around on your forum set, then place your sand on the bottom so it looks like sand and sea… now I got my preset tool set at rectangle, but then I changed my style line, add new raster layer made a small rectangle across the forum set then messed with the blend modes, then added “Princess Of The Sea” in a pixel font that I also changed the blend mode too.. And once you’ve done all that you’re almost done, now add your name and your copyrights, now you're done!

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on September 30th, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Halloween Candy

2010-09-24T02:58:00.005-04:00

New tags made with the awesome scrapkit "Halloween Candy" Kit made by Creative Intentionz, So many possibilities for all your Halloween needs! You can buy this spooky scrapkit at Scrappin Warehouse there is no tutorial's for these so please don't copy them thanks.

Punkette

2010-09-20T02:16:00.007-04:00

New tags made with the awesome scrapkit "Punkette" Kit made by Toxic Desirez, So many possibilities for all your Punky needs! You can buy this hot scrapkit at Scrappin Warehouse there is no tutorial's for these so please don't copy them thanks.

Play It Hard, Forum Style

2010-09-01T03:02:00.007-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Great Ptu scrapkit by Cora

Find her “Play It Loud” kit Here

Fonts of choice.

Plugins Optional:

MuRa’s Meister – copies

-----------------------

I am using the artwork of Keith Garvey

You can buy his tubes www.mypsptubes.com

-----------------------

let’s open 500x200 canvas, now get your preset tool, set on rectangle, foreground null, background black, make a long but kinda skinny rectangle, now go to your deform tool and hover your mouse over the stick like thing in the middle and click and move with your mouse to move it on the side stretch it out making it fit from corner to corner, duplicate the rectangle and mirror it making it look like a big X in the background, merge these rectangles and name black X.

Now copy and paste paper of choice, drag below your X layer, now I clicked back on the X layer, selections all float> defloat click back on your paper layer and click on the canvas tab you need to right click on it and “cut” then select none, this will take away the whole background, but then I want you to click back on the top of the tab on your canvas and I want you to right click then “paste” it back now name this “red layer” or whatever paper color you picked, now look through your layer and there should be a red X layer, delete that, I used red paper so I had a red & black X layer, I got rid of the red layer.

Now I want you to drag the black X below your red layer, now I want you to give the red layer several drop shadows to make the effect of the black X looking how I made it. now let’s go back to your red layer, selections all float> defloat> copy and paste your tubes of choice until it covers all the red, invert>delete on each layer to take off the excess of the tube, now select none. Change the blade mode to hard light to all the tube layers.

Now grab your text tool, type out “play it hard” in a pixel font, place in the middle of your black X, convert to raster. Now get your plugin MuRa’s Meister – copies settings of choice, now click back on the black X, selections all float> defloat> invert now click on your text layer and hit delete, select none. Drag text layer below your red layer and tubes layer, now add your drop shadow to the text layer.

Now time for the fun part, add your main tube to the left side of, let’s open up your scrap pieces, I used the CD, heart with wings, music note, tickets, chain, and disco ball, now resize all of these if needed place them where you want them, merge everything now add borders if you want them, add copyrights then add your name save as a PNG and you’re done.

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on September 1st, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission.

Any resemblance to this tutorial is purely coincidental

Sweetie Mini Scrap

2010-09-01T00:29:00.007-04:00

So i was going through my computer deleting stuff, and i came across this mini scrapkit i made in a forum challenge awhile back, and i figured i'd share it with you all i hope you like it, yes i know it's very LITTLE lol! but it's still cute & usable.

Download Here

Fire

2010-08-31T23:40:00.005-04:00

New tags made with the awesome scrapkit "Fire" Kit made by Angel's Designz The possibilities are endless! for all your firey hot or dark gothic needs! You can buy this hot scrapkit at Scrappin Warehouse there is no tutorial's for these so please don't copy them thanks.

Princess Tales

2010-08-31T20:35:00.004-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Great Ptu scrapkit by Rieka

Find her “Princess Tales” kit Here

Fonts of choice, Template84

By Yvette get it Here

-----------------------

I am using the artwork of PinupToons

You can buy his tubes www.cilm.com

-----------------------

Let’s open up the template, get rid of copyrights, small text, background, and the dotted lines, now X out of all your layers but the last layer, selections all float> defloat> copy and paste paper of choice, invert>delete, select none. Unhide your pink rectangle selections all float> defloat> copy and paste paper of choice invert> delete select none. Now unhide the rest of the layers and do as you did above then merge.

Now go to image>canvas size 700x700 and drag your template in the middle of the frame so you have room for everything. Now open up all your elements, I used lips, high heel, diamond doodle, princess tales book, castle, princess tales word art, and tiara. Now resize these if needed place them all around your tag, now add your tube of choice, add a drop shadow to your tube and your elements, now what i do is right click on the tab of your canvas, right click "cut" then paste back into your paintshop instead of resizing the whole tag, but i did that then i did resize it down some, now add copyrights then add your name save as a PNG and you’re done.

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on Auguest 31th, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Rock Star

2010-08-31T16:37:00.006-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

FTU scrapkit by Twinky

Find her “Rock Star” kit Here

Fonts of choice, mask of choice

Insatiabledreams Mask 62, by Cat

Get that mask and many more Here

-----------------------

I am using the artwork of Ismael Rac

This tube was bought at AMI, But

You can buy his tubes Here

-----------------------

Very easy tutorial.

Let’s open up template3 in twinkys rock star kit, resize it down, click use your magic wand clicking the window of each square selections all modify>expand by 4, add a new raster layer now flood fill 2 colors of choice, select none. Drag layer below your frame, now open up your tube or a close up of your tube you want to use resize click on the right side frame, use your magic wand again click the inside, modify>expand by 4 copy and paste your tube of choice, invert>delete select none. Now change blend mode to your tube.

Now resize your main tube place on the left side above the rectangle frame add drop shadow, place where you want duplicate tube layer, drag below your frame layer, take your eraser tool and erase the tube on the bottom use my tag as a reference so it looks like your tube is poking out of the frame, now add your mask, copyrights now you can add your name save as a PNG and you’re done.

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on Auguest 31th, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Summer Nights

2010-08-31T15:34:00.003-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Beautiful scrapkit by Chassity

Find her “Summer Time” kit Here

Fonts of choice, template52

By Melissa get it Here

-----------------------

I am using the artwork of Jessica Dougherty

You can buy her tubes www.cilm.com

-----------------------

Let’s open your template, take off the palm trees and the dots, now open up your scrap pies of choice, let’s X out of all the layers beside the big square in the background, selections all float> defloat> copy and paste paper of choice, invert>delete select none. Get rid of temp layer, unhide your next layer “narrow rectangle” selections all float> defloat> copy and paste paper of choice, invert>delete select none. Get rid of temp layer, now do the same as above with your next layer rectangle, then the rectangle frame, squares, square frames until you are up to the wordart part.

Unhide wordart, selections all float> defloat> copy and paste paper of choice, invert>delete. Get rid of temp layer, now click back on the paper layer you did for the wordart, selections all float> defloat> modify> expand by 3, add a new raster layer flood fill color of choice select none drag flood fill layer below your wordart layer. Add noise. Now go back to your top left square layer, selections all float> defloat> copy and paste tube of choice invert>delete. Select none. Now shadow tube layer to B&W.

Now open up your tube a place in front of the template resize if needed, add drop shadow, now open up your scrap pieces, I used element 3, 4, 5, 6, 14, 15, 17, 18, 32 re size if needed place them where you want them and add drop shadows add your copyrights now you can add your name save as a PNG and you’re done.

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on August 31th, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Toxic

2010-08-24T02:34:00.006-04:00

New tags made with the awesome scrapkit "Toxic" Kit made by Addictive Pleasures (tamie) The possiblites are endless! and is a perfect themed kit for all your toxic punky tubes!! You can buy this hot scrapkit at Scrappin Warehouse there is no tutorial's for these so please don't copy them thanks.

Fresh New Look

2010-08-17T20:49:00.003-04:00

Phew! So now i finally got a new header and a new layout! Scrapkit is by the Talented Kristin her blog and where to buy this scrap kit is on the side panel, Header is made by me which you can find the tutorial for it it called "Lithium" in the July section. Finally got my colors fixed and finally got rid of that pesky border around my header & my images! Yay thank you to the girls at CM for helping me out! Hope you all like it, also have 2 tutorials new in August and more to come.

Native Beauty

2010-08-17T18:01:00.003-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Great scrapkit by Cora

Find her “Native Beauty” kit Here

fonts of choice, mask of choice

I used Becky_Mask022

Plugins Needed Optional:

none

-----------------------

I am using the artwork of Keith Garvey

You can buy his tubes www.mypsptubes.com

-----------------------

Let’s open your scrap pieces, open up frame 3 resize if needed let’s go to image > canvas size 600x600 drag the frame in the middle, now open frame 4 resize down so it fits on top of frame 3’s square frame in the middle, now grab your magic wand click the sindie of frame 4 selections all float> defloat> modify expand by 3 maybe copy and paste paper of choice invert>delete select none, now drag below both frames, click the inside of the top frame again now copy and paste a close up tube of choice, invert>delete select none, now I changed the blend mode of the tube layer.

Now add a drop shadow to frame 4, and frame 3 and merge these, now get your main tube resize it down if needed and place it on the side of the frames crop the bottom access off, I used my selection tool>select type rectangle then feather set at 5 and just cut off the litle piece at the bottom and the feather will make it look better.

Now time for the fun part adding all the awesome elements, I used some of the beads, sunflower, blue feather, curly ribbon, arrow head, butterfly and the axe, I hid the axe part, now just resize them down to what you want, place them where you want and then give them all a drop shadow now add your mask, your copyrights now you can add your name save as a PNG and you’re done.

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on August 17th, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Buggin

2010-08-17T17:00:00.005-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Great scrapkit by TammyKat

Find her “Don't Bug Me” kit Here

it's only 1$ so get it while it lasts!!

fonts of choice, mask of choice

I used DBV Mask 109

Plugins Needed Optional:

none

-----------------------

I am using the artwork of Dean Yeagle

You can buy his tubes www.cilm.com

-----------------------

Let’s open your scrap pieces, open the pink oval frame with the blue butterfly on it, resize now go to image> canvas size 600x600 drag your fram up higher so we can work with it, grab your magic wand click on the inside of the frame selections all float> defloat> modify> expand by maybe 6 now copy and paste paper of choice, I used the red one. Open your tube I used a fun dean yeagle tube that matched the scrap perfect, add your drop shadow first after copying and pasting it on the frame now duplicate your tube layer drag the duplicated layer below the frame, and make sure the original is on top of the frame, use your eraser tool and take off the tube you want to hide.

Now that was easy! Now time for the fun part let’s bring out all of your elements, I used the clouds, the different colored butterflies, sun, leaf, ladybug, buggin wordart, ribbon, there is several colors of all of the bug elements, papers just everything has a color to match so choose which ones you want, resize all the elements place where you want use my tag as a reference or place them where ever you want, I also used the orange butterfly and the pretty white flowers from the dean yeagle tube itself, now add your drop shadow, now add your mask, your copyrights now you can add your name save as a PNG and you’re done.

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on August 17th, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Gurls Night Out

2010-07-31T05:31:00.006-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Scrap by Sweetness Expressions

Buy this awesome scrap HERE

Collab Temp by Cakes&Vixen

Get their “Vixen” Template Here

Font of choice, I don’t remember

what mask I used sorry.

Plugins Optional:

Penta.com - color dot

Photo Effex - scanlines

-----------------------

I am using the artwork of Elias Chatzoudis

You buy his tubes here www.mypsptubes.com

-----------------------

Alright let’s open your template, I removed the wordart there is several blank layers for some reason just go through and delete them first, let’s open your scrap pieces of choice, I resized the template down a few, now let’s start, select “vector2” selections all float> defloat copy and paste paper of choice invert>delete select none, do the same thing with “vecter4” layer, selections all float>defloat copy and paste your paper of choice invert>delete select none, Close out of every layer then merge these 2 new paper layers add drop shadow.

Now let’s select “raster 14” & “raster13” layers one at a time selections all float>defloat copy and paste paper of choice to each 3 sets either the same paper for all 6 or different colors for each, invert>delete select none merge these add drop shadow. Now lets go to the two splats selections all float>defloat add a new raster layer now flood fill color of choice, select none, do the same with the other splat. Now add noise to it or just leave it blank merge these also add drop shadow.

Now let’s select the left “black box” layers one at a time selections all float> defloat copy and paste tube of choice, invert>delete select none, do the same for the other right “black box” layer, copy the same tube or different, invert>delete select none, now for the 2 black boxes I didn’t flood fill with color or paste paper, so I just turned the tubes to black and white. Then I added the scanlines plugin to each tube, now click on the middle pink box selections all float>defloat copy and paste your tube of choice invert>delete select none I messed around with the blend mode for the tube now add your color dot plugin.

Now merge all of the boxes add a drop shadow to these, now last part lets select “lines” rasters selections all float>defloat copy and paste paper of choice invert>delete select none, now do the same for “raster5", Now it’s time for your main tubes I used 2 place them where you want them resize them first if needed add drop shadows, Open all your scrap elements of choice resize them, I used admit one tickets, gurls night out wordart, purple flower, beaded wire, purple lips, place them where you want them add drop shadows to all of your elements, now add your mask, resize your tag if you want, add your copyrights your name save as a PNG and you’re done.

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on July 31th, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Punk Princess

2010-07-31T01:42:00.004-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Hot Scrap by TammyKat

Buy her scrap HERE

fonts & mask of choice

WSL_Mask117 Here

-----------------------

I am using the artwork of Martin Abel

You buy his tubes here CILM

-----------------------

Open up the frame with the barbwire in the background, resize about to 80% I think, just reize it down where you like it, now go to image>canvas size set at 600x600, drag your frame up higher in the middle of the frame, grab your magic wand click the inside modify> expand by 6 copy and paste paper of choice drag above frame layer, now let’s open your main tube resize it down, place in the front of your frame add drop shadow, duplicate your tube image>mirror then select your paper layer selections all float> defloat copy and paste your tube get it inside your frame where you want it invert>delete, now change your blend mode to luminance legacy.

Now let’s open your scrap elements of choice, I used the purple ribbon, keychain razor blade, one of the cute skulls, black and pink hearts, punk princess label, resize these and place them where you want them use my tag as a reference now add a drop shadow, also add one to your frame, now just add your mask, copyrights, name save as a PNG and now you’re done!

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on July 31th, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Key To My Heart

2010-07-30T22:34:00.005-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Gorgeous Scrap by Chassity

Buy her scrap Here

fonts & mask of choice

WSL_Mask128 Here

-----------------------

I am using the artwork of Jamie Kidd

You buy her tubes here CILM

-----------------------

Open 600x600 canvas, now open up scrap kit pieces resize them first if needed, I opened the white paper frame, resized it down copy and paste to your canvas, grab your magic wand click the inside of your frame selections all float> defloat> modify expand by 3 copy and paste paper of choice, invert>delete drag paper above frame, add drop shadow. Now open your main tube of choice resize if needed add drop shadow now place on the side of the frame cropt the bottom of your tube we’ll hide that with another tube.

Now I used 3 different jamie kidd tubes.. I picked one laying down and I placed it down over the other tube to hide the bottom add a drop shadow, now open the pink heart frame resize if needed place at the opposite side of your frame, grab your magic wand click the inside of the heart selections all float> defloat> modify expand by 2 copy and paste paper of choice invert>delete drag layer below your heart frame, do the same and copy and paste your tube of choice, drag above layer. Add drop shadow to your heart and tube.

Now let’s open up some elements I used the black ribbon, pink ribbon on the button, glittery hearts, silver key, and silver heart, I got my text tool and typed out “Jamie Kidd Holds The Key To My” added any special effect you like to the text, I rotated my text to the side alittle bit use my tag for a reference, i resized the heart down and made it look like the heart was hanging off the my, to complete key to me “heart” I resized the key and placed it by the heart, give these drop shadows, resize your black ribbon, ribbon button and your glittery hearts and place them where you want them, now add your mask, copyrights and your name, now you can save as a PNG and you’re done!

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on July 30th, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Misfits Got Attitude

2010-07-05T22:52:00.003-04:00

Exclusive Scrapkit made for the Creative Misfits!
You can find my scrap & many more at the CM Blog Here
Download all the other fantastic kits there as well!

Lithium

2010-07-01T02:24:00.003-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Hot scrapkit by Kristin

Find her “Lithium” kit Here

Template359 by Missy Here

fonts of choice, mask of choice

I used Becky_Mask022

Plugins Needed Optional:

Xero-radiance

-----------------------

I am using the artwork of Mark Wasyl

You can buy his tubes Here

-----------------------

Let’s open your template, resize if needed take off the wordart, image> canvas size, let’s click on the inside of both your squares to the left and right selections all float> defloat> copy and paste paper of choice, or flood fill, I used a gradient orange/red, now selections all float> defloat> copy and paste your tube of choice in each square, invert>delete select none. Now drag your tube layers below your paper/fill change blend mode to screen, add your radiance plugin settings of choice. Now add noise to your outter square frames again or sharpen them, add drop shadows close out of every layer but these squares and your tube and paper layers merge these.

Select your inner square selections all float> defloat> copy and paste paper of choice, invert>delete select none. Now do the same for the outer inner frame add noise then add a drop shadow to the outer frame, open up the “flame” element and place inside that square, close out of every layer beside the layers we were just working with, merge the inner square, now keep the merged layers closed, now select each circle each time selections all float> defloat copy and pasting your papers of choice to each circle invert>delete select none, closing out all layers and merged these to hide them while you work on the next circle etc etc, Now on the first circle on the outer “glittered” circle I used my paper of choice then I re added the noise to that layer, once you’ve added your papers to all of the 3 circles, add your main tube in front in the middle of the left and right squares resize if needed, add drop shadow.

Now time for the easy part, lets bring out all of the awesome elements, I used lips, diamond star, skull charm with flames, red ribbon, skull chain, skull with roses, red bottle, and silver glitters, now resize these if needed place where you want then now add a drop shadow. Now the chain with the skulls the diamonds in the eyes and the circles isn’t included in the scrapkit I added those myself, so use a diamond of choice recolor and resize and place inside the areas to look like mine. Now add your mask, your copyrights, add your name save as a PNG and you’re done

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on July 1st, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Screen Queen

2010-06-30T21:03:00.003-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Fabby scrapkit by TammyKat

Find her “Hollywood” kit Here

Template39 by Melissa, Here

fonts of choice, mask of choice

I used Becky_Mask022

-----------------------

I am using the artwork of PinupToons

You can buy his tubes Here

-----------------------

Let’s open frame your scrap pieces, bring out your magic wand click the inside of your film strips each square selections modify>expand by 3, copy and paste your paper of choice, invert>delete select none. Now drag below your film strip. Open up 9 tubes now let’s do it again but this time copy and paste each tube inside the square invert>delete select none, drag below film layer, now change your blend mode to screen. now select your film strip selections all float> defloat> copy and paste your paper of choice, invert>delete select none, add noise to your paper layer.

Now close out of all your layers but your film strip, tube layers and paper layer merege all these together. I closed out of the stars, and the bigger square in the background. This is optional, now select your background rectangle selections all float> defloat> copy and paste paper of choice, invert>delete select none. Do the same with your outter rectangle frame, selections all float> defloat> copy and paste paper of choice, invert>delete, select none now add anoise to this layer as well. Close out of all your layers once again beside your rectangle layers merge these.

Open up your main tube add drop shadow and place in the front of the template. Now let’s open up all your scrap elements, I used the popcorn, dimond star, director board, tickets, black curly ribbon, oscar, hollywood 3d wordart, hollywood circle, resize these if needed place where you’d want them, add drop shadows to all of them. Now use your wordart on the template itself “screen queen” I selected this selections all float> defloat> copy and paste paper of choice, invert>delete selections none, select this layer once again selections all float> defloat> modify> expandy by 2 add a new raster layer flood fill color of choice I picked grey, selections none, now drag flood fill layer below your paper layer add noise then a drop shadow. place your wordarts where you want them, i placed them down by her feet, now add your mask, your copyrights now you can add your name save as a PNG and you’re done.

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on June 30th, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Glam Girl

2010-06-30T05:49:00.004-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Great scrapkit by TammyKat

Find her “Glitzy Dame” Here

fonts of choice, mask of choice

I used Becky_Mask022

-----------------------

*Warning* Contains Adult Content

I am using the artwork of Barbara Jensen

You can buy her tubes Here

-----------------------

Let’s open your scrap pieces, open pink circled frame, click the inside of each circle using your magic wand selections modify>expand by 3, add a new raster layer and flood fill color of choice, select none drag filled layer below your frame, bring out 13 tubes of choice, resize all about 80% on each tube grab your magic wand click inside each circle selections modify>expand by 3 now take 12 of your tubes and place inside each circle, invert>delete select none, close out ood filled layer, merge all your tubes together, now unhide your frame drag your pink layer above your tubes and change your blend mode to screen, merge your flood fill, frame and your tube layer together.

Now bring out your elements I used the grey and pink flowers, your ric rac ribbon, and your silver brackets which there is only one so just duplicate that to make two, resize them down to the size you need, place them around your tag where you want them, add drop shadows, bring out your main tube resize if needed also add drop shadow, plave where you want it, use your text tool and type out “glam girl” add your mask, your copyrights now you can add your name save as a PNG and you’re done.

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on June 30th, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Sweet Tooth

2010-06-30T05:30:00.004-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Yummy scrapkit by Chassity

Find her “Delicious” kit Here

fonts of choice, mask of choice

I used Becky_Mask022

-----------------------

I am using the artwork of Elias Chatzoudis

You buy his tubes here www.mypsptubes.com

-----------------------

Let’s open your scrap pieces, open the green frame, resize then image>canvas size 600x600, grab your magic wand select the inside of each frame, selections modify>expand by 4, copy and paste your paper of choice, invert>delete select none, drag below your frame layer, do the same thing click the inside expand, now copy and paste your tubes of choice, invert>delete select none. Now drag this layer below your frame, add a drop shadow to your frame resize your main tube place on either side of your frame, add drop shadow, bring out your text tool type out “sweet tooth”

Now bring out all your sweet treats from the scrapkit, I used the donughts, cherries, creame filled donuts(green) and the donuts stocked on top of each other and the long donut.. I also used the plate and the spoon, resize them if needed place where you want them I made most of the treats on top of the plate.. I then opened the jar with the candies inside I also placed that on the plate.. give all a drop shadow, get your wordart “delicious” the orange one.. you can use either one. Now just add your mask, copyrights then your name, save as a PNG, and now you’re done!

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on June 30th, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

New Sheriff

2010-06-29T03:41:00.004-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Awesome scrapkit by Sarah

Get her “Country Girl” kit Here

fonts of choice mask of choice

I used Becky_Mask022

Plugins Needed Optional:

Xero - porcelain

-----------------------

I am using the artwork of Andy Screen

You can buy his tubes here www.mypsptubes.com

-----------------------

Let’s open your scrap pieces resize if needed, let’s open up your frame with the chicken wire in the background, resize if needed go to image>canvas size 600x600, grab your magic wand click the sindie of your frame, selections modify>expand by 4 copy and paste your paper of choice invert>delete selection none, drag below your frame, now resize your tube closeup click the inside of your frame again, expand by 4 copy and paste tube of choice, selections invert> delete selection none, change your blend mode to screen, add your porcelain plugin settings of choice.

Now let’s add your elements of choice, I used the catus, wordart, sheriff badge, tuff cowgirl belt buckle, string of badges, and the wooden sign, resize them if needed place where you want them to go add drop shadow, now resize your main tube if needed place on the opposite side of your frame, cut off any extra access hide below your string and wordart. I then added “New Sheriff In Town Yeehaw!” to your sign. Add your mask, copyrights, now add your name save as a PNG, and you’re done!

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on June 29th, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Cowgirl

2010-06-29T03:27:00.007-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Awesome scrapkit by Sarah

Get her “Country Girl” kit Here

fonts of choice, Blackoak Std

Mask, I used Becky_Mask022

Plugins Needed Optional:

Xero - porcelain

-----------------------

I am using the artwork of Ismael Rac

You can find out about his tubes Here

-----------------------

Let’s open your scrap pieces resize if needed, let’s open up your "cowgirl" frame, resize now go to image>canvas size 600x600, go to your freehand selection tool set to “point to point”, click on the outlines of your frame, copy and paste your paper of choice I used the cow print paper very cute, selections invert>delete select none. Drag below your frame layer, do the same thing you did with the frame trace the outline of it with your selection tool now copy and paste your tube of choice, invert>delete select none, now drag this below your frame layer but above your paper layer.

Now time for the fun part let’s take out your elements of choice, I used a ribbon, belt buckle, cowboy boot, and catus, now resize these if needed place where you’d like them, add a drop shadow, now go to your tube layer inside your frame and add your plugin to it settings of choice, add your main tube resize if needed add drop shadow, add your mask, then your copyrights, now your name save as a PNG and you’re done!

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on June 29th, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Roller Party

2010-06-20T03:35:00.004-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Awesome Scrap by Cora

Buy “Rollar Girl” Here

Fonts & Mask of choice

I used Becky_Mask022

disco ball & white frame of choice

Plugins needed are Optional:

none

-----------------------

I am using the artwork of Elias Chatzoudis

You buy his tubes here www.mypsptubes.com

-----------------------

Open a 600x600 canvas now if you don’t have a frame like mine you can just make your own my using your square preset tool, if you have the frame resize and paste into your canvas, grab your free hand selection selection type set and point to point, now go on the outside of your frame right click after you reach where you started so now you should see marching ants, copy and paste your pape of choice, invert>delete select none. Drag your paper layer below your frame, now stay on your paper layer selections all float> defloat> copy and paste your tubes of choice, invert>delete. Drag this below your frame layer as well if it isn’t alright, but above your paper layer.

Now if you don’t have a disco ball you can always just use your preset tool and draw out a big circle and place it behind your frame, maybe add some type of plugin inside the circle give it abit of a boost so it doesn’t look plain, But (if you have a disco ball) let’s resize if needed copy and paste drag it below your frame layer select your ball selections all float> defloat> modify> expand by 3, add a new raster layer flood fill gradient of choice, selections none, now you drag this layer below your disco ball, add noise if you like now add a drop shadow.

Now copy and paste your tube of choice, resize if needed place in front of your frame, add drop shadow, bring out your text tool and type out “Roller Girl” foreground your gradient of choice and background black, once you place your text in grab your magic wand select the outside of your text the gradient part now add noise too it, now give a drop shadow.. now it’s time for the fun part, let’s bring out your elements I used sequins, arrow, safty pin, roller skate charm, roller girl button and the pink ribbon with balls on them, resize if needed and place them where you want them, add your drop shadow now add your mask, then resize the tag if needed add copyrights, now add your name, then save as a png and you’re done!

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on June 20, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Teachers Pet

2010-06-19T20:30:00.002-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Super Huge Scrap by Sarah

Buy her “Her HighSchool Years” Here

Fonts of choice & Mask of choice

I used Becky_Mask022

Brick pattern & chalkboard of choice

Plugins needed are Optional:

Mura’s meister-copies

-----------------------

I am using the artwork of Scott Blair

You buy his tubes here www.mypsptubes.com

-----------------------

Open a 550x550 canvas use a brick pattern of choice, copy and paste your pattern on your canvas then apply your mask to your pattern now add your chalk board resize if needed now add drop shadow, now let’s open your tube of choice resize place where you want it and add drop shadow. Bring out your text tool and type out “Teachers Pet” use your copies plugin set on “tiling” cut off any access you don’t want showing. Drag below your tube layer add drop shadow Now open up one of the frames, resize if needed place on your chalk board click the inside of your frame using your magic wand, selections modify> expand by 3, copy and paste your paper of choice invert>delete select none, now do the same and copy and paste your tube inside this time, change blend mode to your tube, to “luminance legacy”

Now let’s just start adding your elements, I used the wordarts whatever, like omg, whatever, and I places them on the brick mask just place them any where, merge just your wordarts together and you can see them alil bit on the brick, now I also used the bored wordart, clip, piece of paper, sharpies and paper clip, use my tag as a reference and just place them where you want them, also add drop shadows, now resize your tag add your copyrights, add your name and save as a png and you’re done!

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on June 19, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Blondes Vs Brunettes

2010-06-19T14:52:00.005-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

(I have nothing against blondes or any other hair colors so don’t be offended! You can change the hair color name to whatever hair color your hair is! )

-----------------------

Supplies Needed:

Tube of choice/close up

Awesome Scrap by Tamie

Buy her “Bad Girl” scrap Here Which is

64% off get it while it lasts! it's a must have!

Fonts of choice & Mask of choice

I used Vix_mask365

Plugins Optional:

Eyecandy 4000-gradient glow

Pent.com-color dot

Mura’s meister-copies

-----------------------

I am using the artwork of Keith Garvey

You buy his tubes here www.mypsptubes.com

-----------------------

Let’s open a 600x600 canvas you can resize later let’s open all the scrap pieces you want, now grab your preset tool and go to rectangle, and on the top make sure the “square” is checked, (it will make a perfect square then lol) check your “background” layer and go to your patterns and open your paper in through there so when you drag out the square your paper is already in there! now drag out 3 on each side both now straight mix it up and use my tag as an example. now once you’ve got all 6 squares select them and now start adding your tubes, left side I used 3 gorgeous blondes, and on the right I used 3 gorgeous brunettes! Once you’ve added these, which you would select all>float defloat> and copy and paste each tube in invert>delete.

Now add a semi think black gradient glow around all your squares, add drop shadow. Now it’s time for your mask, once you’ve added your mask bring out your text tool type out “badgirl” in a pixel font, let’s go to your plugin copies mess with the settings to get your liking, select your mask selections all> float> defloat> invert now go to your text layer and click delete. Select none.. now make sure your text layer is below your squares but above your mask. Bring out your text tool again type out “Blondes Vs Brunettes” on the top of your tag above your frames, now add “Brunette” or which ever hair you choose to put, now bring out your square preset tool again draw out a small circle, now go to your preset shapes and look through and find a check mark or an X. now with that I added my color dot to the words itself and the square and X, then I added a hot pink glow behind everything then I did a drop shadow to my texts and square.

Now for the fun part! Now add all the hot elements you want all around your tag, in this awesome scrapkit there is elements for everyones tastes, I used the sequins, whip, tickets, condom, handcuffs, barbwire and bad girl plate, now resize your tag if you want, add your copyright, your name and now save as PNG and you’re done!

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on June 19, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

100% All Natural

2010-06-19T14:43:00.003-04:00

This tutorial was written in PSP 9 and can be used with any other version.
I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:
Tube of choice/close up
Awesome Scrap by Sarah
Buy her “Going Green” scrap Here
Fonts of choice & Mask of choice
I used Vix_mask365
Plugins Optional:
Xero-porcelin

-----------------------
I am using the artwork of Scott Blair
You buy his tubes here www.mypsptubes.com
-----------------------

Let’s open up some scrap pieces, open up the 3 piece frame , grab your magic wand click the inside of each frame selections> modify> expand by 3 copy and paste your paper of choice, invert>delete select none, drag your paper below your frame. Now let’s do the same step but instead copy and paste your tubes of choice, invert>delete I changed the color you can do so by going to adjust>hue and saturation and mess with the colors I used green obviously lol. Now add your porcelin plugin to your tubes inside your frame.

Now resize tube if needed and place on the side of your frame add a drop shadow now your elements of choice, I used the flower, ribbons, the recycle/organic tabs and your earth place them where you want them and add a drop shadow too them.. I added the organic tab in front of my tubes breasts because I felt like it was too much showing for my taste lol you don’t have to do this! Now add your mask, copyrights, your name now you can save as a PNG and you’re done!

Thanks for trying my tutorial.
Now lets see those results,
I hope you have enjoyed this tutorial!

-----------------------
This tutorial was written on June 19, 2010 by Melissa.
In no way may this tutorial be copied to another
website without the creators permission. Any resemblance
to this tutorial is purely coincidental.

Sweet Nurse

2010-05-29T01:05:00.004-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube came with the scrapkit

Awesome scrap by Chassity

Buy her “Doctor Doctor” scrap Here

Template140 by Beth Here

Fonts of choice

I used Vix_mask365

Let’s open your template, now I removed the wordart and everything that you don’t need. Lets go to the bigger outer circle, selections all float>defloat copy and paste paper of choice, invert>delete none, now do the same for the middle circle, now lets go to the 2 squares backgrounds selections all> float>defloat copy and paste paper of choice invert>delete none.

Go to your square outer frames, and your circles and go on each one doing the same thing, selections all> float> defloat copy and paste paper of choice, now go to each of the outer frames, and the circles I want you to use an inner bevel on all of those layers, mess around with the settings to your liking.

Now just go around adding all your elements of choice, resize them first place them where you want them, add drop shadows to everything, add your main tube I decided to use the tube the kit came with, make sure you use the copyrights with that tube if you use it. now add your mask, and add your name, now you can save as a PNG and you’re done!

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on May 29, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Sticky Sweet Diva

2010-05-28T23:10:00.004-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Yummy scrapkit by Cora

Buy her “Sticky Sweet” scrap Here

Template53 by Melissa Here

Fonts of choice

I used Vix_mask365

Plugins Optional:

Eyecandy 4000- gradient glow

-----------------------

I am using the artwork of Elias Chatzoudis

You buy his tubes here www.mypsptubes.com

-----------------------

open up your template, take out the “sassy” word out, use your text tool and type out “STICKY” instead in bold letters, now let’s use your plugin color dots, select the font selections all> float> defloat> modify> expand by 2 add a new raster layer and flood fill color of choice, select none, drag flood fill below your text layer add noise, merge just the font, now go to image> rotate> counterclock wise which you can use the other way if you want too. Now lets click on the outer frames, selections all> float> defloat add a new raster layer flood fill color of choice I used white, selection none.

Do the same for the inner frame selections all float> defloat copy and paste paper of choice, invert>delete select none, now do the same for the little squares copying and pasting another paper of choice using the same method, I then did the same once again but I copied and pasted the tubes I wanted inside the little frames, selections none. Now I messed around with the blend mode to give it alittle colorized look, I think I used luminance legacy, but mess with the other blend modes to get what you want.

Now let’s pull out your main tube place near the bottom or where you’d like it, add a drop shadow, Now use your text tool again and type out “DIVA” in a bold font, do the same thing you did with the “sticky” text, now keep your text tool out and type out in a pixel font “sweet” a few times place this some where at the side of your template over and over til you get the length you want along the sides of the template. I then used gradient glow I used black and white in the same glow. I then duplicated the font and I rotated it to the opposite side.

Now let’s just open all the elements you’d like to use resize them if needed place where you’d like them, merge everything add your mask, copyrights & your name, now you can save as a PNG and you’re done!

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on May 28, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Beach Treat

2010-05-28T20:40:00.004-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Awesome scrap by TammyKat

Buy her “Cool Treats” scrap Here

Template56 by Melissa Here

Beach picture, I googled one

Fonts of choice

-----------------------

I am using the artwork of Elias Chatzoudis

You buy his tubes here www.mypsptubes.com

-----------------------

open up your template, take off the babe wordart if you want, now let’s start click on the big rectangle, selections all> float>defloat, copy and paste paper of choice, invert>delete, now click on the words beach selections all> float>defloat copy and paste your picture of choice, invert>delete, while still on the beach picture selections all> float> defloat> modify> expand by 2, add a new raster layer and flood fill color of choice, select none and add noise give this layer drop shadow and merge your beach layers only.

Now let’s click on each of the background layers one at a time do this with each one selections all> float> defloat copy and paste paper of choice, invert>delete none, now the hard part is over, let’s open up all your scrap elements of choice, resize if needed and place around the tag, now add your main tube resize if needed, drop shadow. Now bring out your text tool and type out “beach treet” in a pixel font a few times til you reach the length you want set it up on the top and the bottom of the rectangle, add a gradient glow this is optional and drag your text layer below any layers you want it to hide under.

add your copyright, & your name, Now save as a PNG and you're done!

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on May 28, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Hardcore Gothic Babe

2010-05-28T16:17:00.005-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Awesome scrap by TammyKat

Buy her “Hardcore” scrap HERE

Fonts of choice & mask of choice

I used Vix_mask365

Plugins Needed Optional:

Eyecandy 4000- Gradient glow

Photoeffex - scanlines

Xero – Radiance

Xero - Porcelain

-----------------------

I am using the artwork of Elias Chatzoudis

You buy his tubes here www.mypsptubes.com

-----------------------

let’s open up a new canvas 600x600, now let’s open the scrap pieces of choice, I opened up the frame, now resize the frame down to a size you want I used the deform tool to do this so I don’t have any certain settings, duplicate this and drag frame beside your other frame use my tag as a reference, duplicate the same frame now drag is across again and use your deform tool and tilt it to the side alittle bit, to drag stuff I use the mover tool.

Now merge just your frames together, click on the inside selections all> modify> expand by 2, copy and paste paper of choice invert>delete select none. Now drag your paper layer below your frame, do the same with a close up tube place in the larger two frames, and then use the main tube maybe resize it a bit flipping it the opposite side if you’d like on the tilted frame do this my selecting the inside and doing the step you did for the paper, now add your porcelain effect on one tube, change the blend mode to your close up tube.. I used hard light I think, and use the radiance on this layer..

Now give any of these drop shadows, I then resized the main tube down alittle bit place infront of your frames, I then took her “hardcore” wordart and placed it the front, I added a gradient glow of white, then I added noise then drop shadow, this is optional, I then got my text tool out got on a pixel font and typed out “gothic babe” down along the bottom, I placed the wordart and text down by my tube so it would cover up the bottom of it..

Now bring out one of the star frames, resize if needed select the inside with your magic wand, selections> expand by 3, copy and paste paper of choice, invert>delete, select none. Now drag paper layer below frame, do the same but copy and paste your tube this time, colorize this if you want, now add your scanlines plugin, if you don’t have this you can use blinds and tweak with the settings you will get the same exact effect.

Add a drop shadow to that, now let’s open up some elements I opened up a few of those beads, I used pink and purple resized them down a bit and I placed them down the tilted frame, a few times added a drop shadow, and I merged everything

add your copyright, mask & your name, Now save as a PNG and you're done!

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on May 28, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Warning 2 Hot 4 You

2010-05-22T17:50:00.004-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Beautiful Scrap by Teresa’s Treasures

Scrap called “Shabby Chick” buy HERE

fonts of choice water brush rob, bankgothic md bt

Mask of choice, I used mask10 by Rachel HERE

-----------------------

I am using the artwork of Keith Garvey

You buy his tubes here www.mypsptubes.com

-----------------------

very quick and easy tutorial, open up scrap papers, elements, and the frame, use your freehand selection tool, set at point to point and go around the frame, add a new raster layer, copy and paste paper of choice, invert> delete select none, now drag your paper layer below your frame layer.

Do the same again with your freehand tool again around the frame, now copy and paste your tube of choice, invert> delete select none. Drag your tube layer below your frame but above your paper layer, add a drop shadow to your tube layer now change your blend mode on your tube to luminance legacy.

Now let’s resize the clip and the beads on the string sharpen, place the clip in right top hand corner of the frame and place the beaded string just on top of the frame as well, give both a drop shadow. Now add your main tube resize if needed add drop shadow to your tube and to your frame. Now use your text tool type out the words “WARNING” place your text on top of the frame slanted if you’d like, use your text too again and type out thw words “2 Hot 4 You” place at the bottom of your tag.

add your mask, copyright & your name, Now save as a PNG and you're done!

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on May 22nd, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

VIP Groupie

2010-05-19T01:08:00.004-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Badass Scrapkit by TammyKat & Sarah

You can buy “Scream My Name” HERE

Using Sara's Template36 get it HERE

font of choice i used Brody

I am using the artwork of Pinup Toons

You buy his tubes here www.cilm.com

-----------------------

easy tutorial

let’s open your scrap pieces papers and elements, and your template, select your template circle, selections all>float> defloat> copy and paste paper of choice, invert>delete select none. Now click on your back circle layer, do the same thing selections all float> defloat> add a new raster layer, flood fill color of choice, selections none add noise to this layer. Now lets go to your small squares back layers of the quares do the same select them and all that, flood fill color of choice and add noise, I did the same color. Select the inner frame selections all> float> defloat> copy and paste paper of choice, do this to both squares. Add drop shadows to your squares, drag tube layers below frame if they are above.

Now do the same to the other layers of the template selections all> float> defloat> copy and paste your papers of choice to each layer, add your tubes inside the squares, inside the cicle all by doing the same thing as the paper selections all> float> defloat> copy and paste tubes of choice invert>delete select none. Add your main tube in front add drop shadows to everything that needs it, add your elements of choice and give those a drop shadow, I used the vip necklace, glitter smear and the razor blade keychain.

Add your copyright & your name, Now save as a PNG and you're done!

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on May 19th, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Sexy Gal

2010-05-18T22:45:00.003-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Awesome scrapkit by Cora

You can buy “I love__” HERE

font of choice i used Brush Script Std

I am using the artwork of Jose Cano

You buy his tubes here www.mypsptubes.com

-----------------------

easy tutorial

Let’s open the purple frame, lets click inside selections> select all> modify> expand by 3 copy and paste paper of choice, invert>delete select none. Drag paper layer below your frame layer, Now do the same for the fence element resize down small, now click inside on the frame selections select all> modify> expand by 3, invert>delete select none.

Now let’s get your tube and click inside each circle of the frame selections modify> expand by 3, now copy and paste your tubes in each frame, invert>delete each now drag your tube later below your frame, turn tubes black and white, add your elements of choice, I used a flower, clip, hearts, ribbon and string, add drop shadows, add your main tube drag below your ribbon and string cut off any part of the tube you don’t want to see.

Now merge your whole tag, duplicate this layer, to go your effects> texture effects> mosaic antique default settings. Now add your copyright & your name, Now save as a PNG and you're done!

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

-----------------------

This tutorial was written on May 18, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

There's Only One You

2010-05-02T16:21:00.005-04:00

This tutorial was written in PSP 9 and can be used with any other version.

I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tubes of choice/close up

Gorgeous “Be You” Collab by

TammyKat, Cora & Sarah buy HERE

font of choice i used Bickley Script LET

mask of choice I don’t remember the one I used

Plugins Needed Optional:

Xero - radiance

-----------------------

I am using the artwork of Mark Wasyl

You buy his tubes here www.cilm.com

-----------------------

Very easy tutorial!

let’s open your scrap pieces I used the awesome frame 4, resize if needed, now use your magic wand and click on the inside of the frames make sure to get every little piece, selections all modify> expand by 8 copy and paste your paper of choice, invert>delete select none. Now drag your paper layer below your frame, select the bigger frame do it the same way as the paper copy and paste your close up of choice, invert>delete select none. Now I changed blend mode to luminace to get the color of the paper to change my tube this is optional, now I added the radiance plugin settings of choice.

Now let’s resize your tube if needed place where you’d like your tube, open your clipped heart resize add in the corner, now open the purple spotted ribbon resize if needed now place at the bottom erase the end by the blue flower. Now add wordart resize if needed add shadow to everything you need it on. Now all you need to do is add your mask your copyright & your name, Now save as a PNG and you're done!

Thanks for trying my tutorial.

Now lets see those results,

I hope you have enjoyed this tutorial!

This tutorial was written on May 2nd, 2010 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Unique Styles

The Diva

Island Beach

New Templates

My First Cluster

Falling Leaves

Subtle Beauty

Beached Mermaid

Wild One

New look 2011

Naughty Student

Princess Of The Sea

Halloween Candy

*Punkette*

Play It Hard, Forum Style

Sweetie Mini Scrap

*Fire*

Princess Tales

Rock Star

Summer Nights

*Toxic*

Fresh New Look

Native Beauty

Buggin

Gurls Night Out

Punk Princess

Key To My Heart

Misfits Got Attitude

Lithium

Screen Queen

Glam Girl

Sweet Tooth

New Sheriff

Cowgirl

Roller Party

Teachers Pet

Blondes Vs Brunettes

100% All Natural

Sweet Nurse

Sticky Sweet Diva

Beach Treat

Hardcore Gothic Babe

Warning 2 Hot 4 You

VIP Groupie

Sexy Gal

There's Only One You

Punkette

Fire

Toxic