Sunday, February 8, 2015

Ptu - Sexiness

This tutorial was written in PSP 9 and can be used with any other version. I assume that you have a working knowledge of PSP.


Supplies Needed:
Tube of choice/close up

PTU Scrap kit by Inzpired Creationz
"Sexiness" Purchase at ICZStore

Font of choice
MA Sexy

Temp738 by Millie
Millie's PsP Madness

Mask of choice

Plugins Optional:
xero - radiance - jeans/color dot

PSP effects:

Tutorial shortcut index:
"Delete" on your keyboard under Insert.
"C/P" copy and paste as new layer.
Remove "O/L" Remove original layer.
"D/P" Drop shadow located in 3D effects.
"R/S" Resize layer located in Image.
New "R/L" Raster layer, in Layers.
"F/F" Floor fill (paint bucket) tool.

Good D/P settings:
0, 0, 57, 6, color black

Good add noise settings:
Uniform- 70-90 % noise monochrome
Random- 10-34% noise monochrome

I used the artwork of Ismael Rac
You can find his artwork Here

*May be difficult- working with lots of layers- steps*

Open template remove your copyrights and BG
Now Image- resize set at percent 85x80
now back into Image- canvas size set to 600x600
now it's time to merge some of the layers.

Hide all layers
Keeping 1-2, merge - rename merge1 - hide
Unhide layers 5-6 merge - rename merge2 - hide
Unhide layers 7-8, merge - rename merge3 - hide
Unhide layers 9-10, merge - rename merge4
Unhide all of our layers now

Select layer 4, selections-all -float- defloat
paper5, R/S 80%, now C/P onto canvas
Selections- invert- delete, select none. remove O/L

While this layer is still selected. selections- all- float
defloat, modify- expand by 2, layers- add new raster layer
select your floor fill tool, choose color white. fill this space
select none, drag below your paper layer. add noise -D/P

Select merged1, selections- all- float- defloat
paper2, R/S 60%, now C/P onto canvas
Since this is small, i had to C/P twice, using the
mover tool, drag the papers inside marching ants
Then selections- invert- delete on each paper layer.
Select none - remove O/L. hide all your layers but these
 two paper layers. merge them. Unhide all layers

Still having this layer selected, selections- all- float
defloat- modify- expand by 2, image- add new raster layer
floor fill color white. drag below paper layer add noise - D/P

I decided to remove layer 3.

Select merge2, selections- all- float- defloat
paper10, R/S 60%, C/P onto canvas twice,
use mover tool to drag the papers inside marching ants
Selections- invert- delete on each paper layer. select none
remove O/L, then hide all layers but those two
 merge - selections- all- float- defloat, layers- new R/L
using your F/F tool, fill layer, i choose white. select none.
drag this layer below your paper, add noise - D/P

Merge. unhide all layers, and do this one more time
for your sexy wordart, or use a bevel/plugin on it

Now i know we've not done anything to merge3
Open your tube of choice. C/P onto your canvas
drag her where you want. i choose middle.

I decided to use half body tube, but she was full length
so i placed her in the middle. erased the parts i didn't need
Selections- all- float- defloat modify- expand by 2
new R/L, then F/F color of choice i used white. D/P
hide all layers to merge the noise to your tube.

Now if you have eyecandy gradient glow use that
instead of my steps, i don't have it so that's how i do them.

Now going back to your squares, merged3, I wanted
to use two colors, so use your magic wand. click on the squares
you want to use one color- i choose black & #f55fd5
I selected top two and bottom two "four corners"
new R/L, i choose that for black. F/F in the spots - select none.
Now using your magic wand again, new R/L, flood fill
the pink color (matches the kit) into these spots. remove O/L

Hide all layers again. to merge your now black-pink colors.
Now unhide everything again lol..

Now you can either use your magic wand select inside
each square, C/P tube, and add it how you want..
but this is what i did.. If you get confused, please do it your way

After i merged those, i went to selections- all- float- defloat. i picked
the same tube i wanted to use.. resized her down since she was large
i C/P the tube onto my canvas, using my mover tool, i dragged the parts
of the tubes i wanted inside the box, you can tell where they go by the
marching ants. now i did this 6 times. (if you do an easier way by all means)
once you've got all the tubes in place, selections- invert- delete.
You must click "delete" on ever tube layer you pasted onto your canvas.
select none inbetween after you delete the extra off,
Make sure you do this step for each color. since i did two
I wanted different blend modes at the end. so extra work...

I know, this seems like a tough - long one. Hang in there!!
I then hide all of my layers BUT my faces of my tubes. Since i used
two different colors i merged only the faces for the black,
and merged only the faces for the pink separately. Phew..
Unhide everything again, i changed blend modes.
Pink was changed to screen. the black wasn't changed. i turned
the tubes B/W and lowered opacity to 60%
On only the black squares i used - jeans - 38- 4
and on the pinks i used - color dot, 57- 7- 255- 255- 255

Merge all of my tubes-boxs together,
i added a white border with noise and D/P.

Now it's element time

Elements i used and the resized %
Using this drop shadow: 0, 0, 61, 5, color black
Wordart1- 80%
Purse1- 40%
Shoe2- 30%
Sex toy8- 30%
Lolli3- 40%
Sexy toy1- 40%
Glasses1- 40%
Cosmetics4- 25%
Cosmetics1- 30%

Put them where you want, or use my tag as a guide.
Apply your mask- add copyrights, your name save as a PNG
You're done!

Thanks for trying my tutorial.
Now lets see those results.

This tutorial was written on Feb. 8th, 2015 by Melissa.
In no way may this tutorial be copied to another
website without the creators permission. Any resemblance
to this tutorial is purely coincidental.

No comments:

Post a Comment