Ptu - Toxik Angel

This tutorial was written in PSP 9 and can be used with any other version. I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Paid Scrap kit by Toxic Desirez

"Toxik Angel" Purchase at Skullified Scrapz

This kit is on sale! get it before it's not anymore

Font of choice

Buttercup

Gradient of choice

I think mine came with PSP9

"Duotone bright green"

Plugins Optional:

Redpaw media - beautifier

Screenworks - pixel shade

Xero - radiance

Tutorial shortcut index:

"Delete" on your keyboard under Insert.

"C/P" copy and paste as new layer.

Remove "O/L" Remove original layer.

"D/S" Drop shadow located in 3D effects.

"R/S" Resize layer located in Image.

New "R/L" Raster layer, in Layers.

"outer glow" Gradient glow from eye candy

Or my method on my blog under "How to dos"

Good D/S settings:

0, 0, 57, 6, color black

Good add noise settings:

Uniform- 70-90 % noise monochrome

Random- 10-34% noise monochrome

-----------------------

I used the artwork of Martin Abel

You can find his artwork HERE 

Tube i used can be found Here

-----------------------

Open canvas set to 650x650

Open filmstrip R/S to 85% C/P onto canvas

Drag down half way to the bottom

Open tube of choice, R/S to 95%

C/P onto canvas, drag on top of filmstrip

As if she's sitting - but kinda hanging off the top

Open chain R/S to 85% C/P onto canvas

Arrange this chain in a rectangle square

Then make a chain go vertical in the middle

then horizontal in the center as well

You should now have 4 seperate frames in chain

You want to erase any extra chain make sure the chains connect 

Now place a bottom chain you won't see this but,

it'll be easier to do the next step if they're connected

Using magic wand click inside two frames of choice

Selections - modify - expand by 2 Open paper4 R/S to 60% 

C/P onto canvas (twice) drag the papers inside each frame

selections invert, delete (on both), select none now

drag these paper layers below your chains

Do this same step for the other 2 frames using paper 1 R/S to 60%

Now select filmstrip i put an outerglow on this frame

First i did black, then white then added noise D/S

Select your tube layer and do the same thing

i only did white, add noise, D/S apply radiance

Then i went ahead and did the same for the chains

Now click inside filmstrip, selections modify - expand by 3

Add new raster layer - i flood filled gradient of choice

I think mine came with psp. Drag below filmstrip

I then put my tube inside each frame the way i liked

Merged them all (tubes) turned tube to greyscale

changed blend mode to screen - duplicate this layer

should be set to overlay - i also added pixel shade to duplicated layer

Then on my gradient color layer i lowered opacity to 88%

then i added radiance to tubes, settings of choice

I then went ahead and put tube back inside the frames

put them on either corner bottom left, top right

Turned greyscale and applied a heavy radiance

Now it's element time

Elements i used and the resized %

Using this drop shadow: 0, 0, 66, 8, color black

Barrel - 25%

Winged eye - 40%

Skull&Candle - 25%

Eye & Goo - 8%

Flame - 40%

Collar - 25%

Rose&Skull - 30%

Swirl - 30%

Lips - 20%

Spiked ball - 25%

Lollipop2 - 20%

Butterfly - 20%

Brad - 20%

Sparkles - 60%

place elements where you want, or use my tag as a guide.

Apply your mask, copyrights,  add your name save as a PNG

I applied beautifier to the whole tag, setting of choice

I used paper 3 for my mask

You're done!

Thanks for trying my tutorial.

----------------------

This tutorial was written on April 27th, 2017 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Ptu now Ftu - Beautiful Fall

 

 This tutorial was written in PSP 9 and can be used with any other version. I assume that you have a working knowledge of PSP.


-----------------------

Supplies Needed:
Tube of choice/close up

Ptu now Ftu Scrap kit by Polkadot Scraps
 "Fall Days" HERE

3rd scrapkit down


font of choice

Plugins Optional:

xero - radiance
penta.com - color dot

Code Word: When ever i say "delete" You
are selecting delete on your keyboard under insert.




-----------------------
I am using the art of Martin Abel
You can find his work Here 

Find tube i used Here
-----------------------


*easy working with  layers*


Let's your double polaroid picture frames. canvas size 600x600 using your magic wand. click the inside of bth frames. selections- modify- expand by 8. choosing paper of choice. i used paper 11. i resized it down a little bit. copy paste on your canvas. selections- invert-delete. select none. drag below your frame layer.


Opening your tube/close up of choice. Using your magic wand again, while frames are selected click the inside, selections- modify-expand by 8 copying your close up tube of choice. paste on your canvas using your mover tol to drag tube where you want it to go inside the marching ants. once you've got it, selections- invert-delete, select none. drag your tubes below frame layer. above paper. change blend mode to soft light. depending on your liking. i then went to  Adjust- hue and saturation- colorize both dials set at zero.

Now while both tube layers are selected inside your frame. add a radiance and color dot settings of choice. now add a slighty drop shadow to the frame and merge all of these layers together. Now it's time to add your main tube. I placed my tube on one side of the frame. her elbow fit perfect on the side like she was standing inside of the frame. i had to erase some of the tube to get this sort of effect.


Adding slight radiance and drop shadow to your main tube.. Now it's time to add the elements. I used the wordart that came with the kit "Beautiful" , owl 1, acorn, flower 4, frame 4, leaves 1, paper 11, ricrac, scattered leaves 3 and 4, resize these elements down to where you like them placing them where you want, or using my tag as a guide.


Now add your copyrights, add your name and save as a png and  you’re done!


Thanks for trying my tutorial.
Now lets see those results.

----------------------

Ptu now Ftu 2/26/2017
This tutorial was written on November 18th, 2013 by Melissa.
In no way may this tutorial be copied to another
website without the creators permission. Any resemblance
to this tutorial is purely coincidental.

Ptu - Bombs Away

This tutorial was written in PSP 9 and can be used with any other version. I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Paid Scrap kit by Toxic Desirez

"Bombs Away" Purchase at Hania's Design

Temp396 by Kristin

Grab @ her blog Here

3rd template down

WSL_Mask302

Font of choice

Broken Glass

Plugins Optional:

Redpaw media - beautifier

PhotoEffex - scanlines

xero - radiance

Tutorial shortcut index:

"Delete" on your keyboard under Insert.

"C/P" copy and paste as new layer.

Remove "O/L" Remove original layer.

"D/S" Drop shadow located in 3D effects.

"R/S" Resize layer located in Image.

New "R/L" Raster layer, in Layers.

"outer glow" Gradient glow from eye candy

Or my method on my blog under "How to dos"

Good D/S settings:

0, 0, 57, 6, color black

Good add noise settings:

Uniform- 70-90 % noise monochrome

Random- 10-34% noise monochrome

-----------------------

I used the artwork of Martin Abel

You can find his artwork HERE 

Tube i used can be found Here

-----------------------

Open template R/S to W: 72% , H 80%

Canvas size set to 650x650

Remove these layers: 13, 5, 4, 7 & copy7

Open tube of choice, R/S if needed

C/P onto canvas, drag in center apply D/S

i used a regular shadow then i used this

-1, -8, 67, 5 color black. or settings of choice

I also applied slight radiance to tube and sharpened

Select raster11  selections all float defloat. open pp1

R/S to 80% C/P onto canvas, invert - delete, select none

apply gradient glow of choice - add noise - drop shadow

Do the same step for copy of raster 11

Select raster8  selections all float defloat. open pp7

R/S to 80% C/P onto canvas, invert - delete, select none

apply gradient glow of choice - add noise - drop shadow

Do the same step for copy of raster 8

Select raster3  selections all float defloat. open pp4

R/S to 80% C/P onto canvas, invert - delete, select none

apply gradient glow of choice - add noise - drop shadow

Do the same step for copy of raster 3

Select raster9  selections all float defloat. open pp12

R/S to 80% C/P onto canvas, invert - delete, select none

apply gradient glow of choice - add noise - drop shadow

Do the same step for copy of raster 9

Select raster10  selections all float defloat. open pp11

R/S to 80% C/P onto canvas, invert - delete, select none

apply gradient glow of choice - add noise - drop shadow

Do the same step for copy of raster 10

Select raster2  selections all float defloat. open 2 pp's 3 & 5

R/S to 80% C/P onto canvas, invert - delete, select none

Do for both papers, delete on each layer too, then using selection tool

divide the circle in half and delete on the side of the paper you want on that side

apply gradient glow of choice - add noise - drop shadow

Open gear R/S to 40% C/P onto canvas, drag on top of the layer 6

Remove layer 6 now place this gear there, do the same for the bottom

Open frame2 R/S to 40% i turned this greyscale

C/P onto canvas, drag above circle layers in the background

duplicate and mirror - flip so the bottom is matching - D/S

Select raster 12 selections all float defloat - open tube of choice

C/P onto canvas, drag inside marching ants - insert - delete, select none

Turn tube greyscale, apply slight radiance - settings of choice

lower opacity down to 54% or settings of choice

Apply PhotoEffex - scanlines - i used default settings

apply outer glow - add noise - drop shadow 

Now it's element time

Elements i used and the resized %

Using this drop shadow: 0, 0, 61, 6, color black

Gun - 40%

Bullets - 20%

Skull1 - 20%

Bullet Holes - 40%

Gas Mask - 25%

Cuppy - 20%

Bomb2 - 25%

Bomb1 - 20%

Bomb3 - 20%

Skull3 - 20%

Blood - 45%

place elements where you want, or use my tag as a guide.

Apply your mask, copyrights,  add your name save as a PNG

I applied beautifier to the whole tag, setting of choice

You're done!

Thanks for trying my tutorial.

----------------------

This tutorial was written on February 20th, 2017 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Ptu - Toxic Forest

This tutorial was written in PSP 9 and can be used with any other version. I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Paid Scrap kit by Toxic Desirez

"Toxic Apple" Purchase at Skullified Scraps

MizMask118 - Here

8th one down

Wordart by me - Here

Font of choice

AnneBoleyn

Plugins Optional:

Redpaw media - beautifier

xero - radiance

Tutorial shortcut index:

"Delete" on your keyboard under Insert.

"C/P" copy and paste as new layer.

Remove "O/L" Remove original layer.

"D/S" Drop shadow located in 3D effects.

"R/S" Resize layer located in Image.

New "R/L" Raster layer, in Layers.

"outer glow" Gradient glow from eye candy

Or my method on my blog under "How to dos"

Good D/S settings:

0, 0, 57, 6, color black

Good add noise settings:

Uniform- 70-90 % noise monochrome

Random- 10-34% noise monochrome

-----------------------

I used the artwork of Martin Abel

You can find his artwork HERE

Tube i used can be found HERE

-----------------------

Open your canvas 650x650

Open frame 3 R/S to 50% C/P onto canvas

drag to the far left, duplicate - mirror

Open tube R/S to 80% C/P onto canvas

drag down alittle bit. but keep in the center

Sharpen then apply radiance settings of choice

Open stump R/S to 40% C/P onto canvas

Drag below tube, drag to far left frame

Duplicate - mirror stump to the other side

Open castle R/S to 60% C/P onto canvas

Drag behind your tube and inbetween the frames

Click inside left frame. selections - modify expand by 5

Add a new raster layer - Open background R/S to 40% 

C/P "into selection" select none. drag below frame

Duplicate paper layer - mirror,  apply outer glow

Color red - add noise, now apply drop shadow

Do this step on both of your frames

Open hag R/S to 40% C/P onto canvas

Drag below tube but above your castle layer

Erase any of the hag sticking out behind tube. D/S

Open apply  R/S to 20% C/P onto canvas 

Drag above tube by the fox tail. D/S

Open queen skull & snake R/S to 25% C/P onto canvas

Drag next to the apply but behind it. D/S

Open Stag R/S to 40% C/P onto canvas

Drag behind your tube but above your castle. D/S

Open from R/S to 12% C/P onto canvas 

Drag on top of right stump D/S

place elements where you want, or use my tag as a guide.

Apply your mask, copyrights,  add your name save as a PNG

I applied beautifier to the whole tag, setting of choice

You're done!

Thanks for trying my tutorial.

----------------------

This tutorial was written on November 16th, 2016 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Ptu - Eat Your Heart Out

This tutorial was written in PSP 9 and can be used with any other version. I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Paid Scrap kit by Toxic Desirez

"Fangtoxic" Purchase at Skullified Scrapz

Temp827 by Millie's PSP Madness

Grab template HERE

Gradient of choice

Font of choice

Gracey's Curse

Mask by Brutal Designs

Mask22 grab mask HERE

Plugins Optional:

Redpaw media - Beautifier

Eyecandy 4000 - glass

Xero - radiance

Penta.com - color dot

Tutorial shortcut index:

"Delete" on your keyboard under Insert.

"C/P" copy and paste as new layer.

Remove "O/L" Remove original layer.

"D/S" Drop shadow located in 3D effects.

"R/S" Resize layer located in Image.

New "R/L" Raster layer, in Layers.

"outer glow" Gradient glow from eye candy

Or my method on my blog under "How to dos"

Good D/S settings:

0, 0, 57, 6, color black

Good add noise settings:

Uniform- 70-90 % noise monochrome

Random- 10-34% noise monochrome

-----------------------

I used the artwork of Martin Abel

You can find his artwork HERE

Tube i used find HERE

-----------------------

Open Temp R/S to 90% then canvas size set to 620x620

Remove copyrights, and remove doggy wordart

Select raster 6. selection all float defloat - open paper15 R/S to 80%

C/P on canvas, selections - invert - delete, select none.

remove O/L, apply outer glow  then drop shadow

Select raster2, selection all float defloat - open paper 13 R/S to 60%

C/P on canvas, selections - invert - delete, select none.

remove O/L, apply outer glow  then drop shadow

Select raster3, selection all float defloat - open paper13

C/P on canvas, selections - invert - delete, select none.

remove O/L, apply outer glow  then drop shadow

Select raster1, selection all float defloat - open paper11 R/S 80%

C/P on canvas, selections - invert - delete, select none.

remove O/L, apply outer glow  then drop shadow

Select raster5, selection all float defloat - open paper17 R/S to 60%

C/P on canvas, selections - invert - delete, select none.

remove O/L, apply outer glow  then drop shadow

Select raster4, selection all float defloat - open paper 17

C/P on canvas, selections - invert - delete, select none.

remove O/L, apply outer glow  then drop shadow

Select  raster7,  using your magic wand click the outside frame

add a new raster layer flood fill color of choice. i choose white

add noise then apply drop shadow. Do the same for the other circles

I applied glass settings of choice to the outside frame before drop shadow

Once you've done this. go back and click on the inside (black) circle

Flood fill color of choice. i choose a red gradient. do the same for all circles

I put a close up tube inside these circles blend mode: screen. turned tube greyscale

then apply radiance - then color dot both settings of choice

Open wordart and C/P onto canvas place in fromt of your tube

Apply outer glow, then apply drop shadow

Now it's element time

Elements i used and the resized %

Using this drop shadow: 0, 0, 56, 7, color black

Coffin - 30%

Moon - 40%

Rose - 30%

Lips - 25%

Label - 40%

Teeth - 20%

Vamptini - 25%

Eye - 10%

Flower2 - 30%

place elements where you want, or use my tag as a guide.

Apply your mask, copyrights,  add your name save as a PNG

Apply beautifuler to your whole tag after you merge

You're done!

Thanks for trying my tutorial.

----------------------

This tutorial was written on September 30th, 2016 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Ptu - Not All Here

This tutorial was written in PSP 9 and can be used with any other version. I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Paid Scrap kit by Toxic Desirez

"Not All Here" Purchase at Skullified Scraps

Font of choice

AnneBoleyn SH

Mask(s)

RR_MaskSet63_Mask4

I can't find the owner to this mask

Go grab it Here - If this is yours or you know

the owner please comment and let me know so i'm

able to give proper credit, Thank you.

Plugins Optional:

Xero - radiance

Redpaw media - beautifier

Tutorial shortcut index:

"Delete" on your keyboard under Insert.

"C/P" copy and paste as new layer.

Remove "O/L" Remove original layer.

"D/S" Drop shadow located in 3D effects.

"R/S" Resize layer located in Image.

New "R/L" Raster layer, in Layers.

"outer glow" Gradient glow from eye candy

Or my method on my blog under "How to dos"

Good D/S settings:

0, 0, 57, 6, color black

Good add noise settings:

Uniform- 70-90 % noise monochrome

Random- 10-34% noise monochrome

-----------------------

I used the artwork of Martin Abel

You can find his artwork Here

The tube i used can be found Here

-----------------------

Image canvas size 620x620

Open grass R/S to 80% C/P onto canvas

Using deform tool make alittle smaller

Duplicate grass a few times, mirror them until you

get a patch of grass/hills you're content with

Open frame2 R/S to 50% C/P onto canvas

Deform tool again this time swirl up to the left alittle

Open paper8 R/S to 60% - Magic wand select

click inside frame - selections modify - expand by 5

C/P paper onto canvas, selections invert - delete. select none

Open tube of choice R/S to 70% C/P onto canvas

Drag behind your grass layer, but above star frame

Apply radiance: 128, 50, 128, 39 of setting of choice

Open wordart R/S to 60% C/P onto canvas

Duplicate a few times and place behind all the layers

each time you duplicate player it lower than the last

Open ribbon - flip and mirror now R/S to 50%

C/P onto canvas, drag below all layers off to the left side

Back to your tube, reopen it R/S to 60%

Duplicate tube on top layer turn greyscale

Adjust- hue/sat- colorize.  saturation dial at 0

Zoom in on your greyscale layer erase her eyes

so the color from below shows through. merge layer

Select magic wand, click inside star frame selections-modify

expand by 5. Back to your tube C/P onto canvas, using your

move tool, drag your tube inside the frame drag under if you need to

selections- invert- delete, select none. apply drop shadow

Once i got my tube inside the frame i went in and i selected

around her hair made it smooth and erased the cat from her hair

This is optional. i just wanted to take that part off

Now it's element time

Elements i used and the resized %

Using this drop shadow: 0, 0, 43, 7, color black

Watch - 50%

Time warp - 40%

Flower2 - 30%

Cake - 27%

Tree - 30%

Mushrooms - 20%

Cuppycake - 25%

Tea cups - 30%

Brad - 15%

Bottle - 20%

Cards - 25%

Mushroom 2 - 8%

Rabbit - 20%

Caterpillar - 12%

place elements where you want, or use my tag as a guide.

Apply your mask, copyrights,  add your name save as a PNG

I applied beautifier to the whole tag, setting of choice

I used background 2, blurred it alittle then sharpen

Duplicated the mask layer and flipped the opposite color

So it looks like two masks but it's just the one

You're done!

Thanks for trying my tutorial.

----------------------

This tutorial was written on May 10th, 2016 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Ptu - Red Queen

This tutorial was written in PSP 9 and can be used with any other version. I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Paid Scrap kit by Toxic Desirez

"Red Queen" Purchase at Skullified Scrapz

Font of choice

Allura

Temp174 by Kristin

Grab HERE

Plugins Optional:

red paw media - beautifier

xero - radiance

Tutorial shortcut index:

"Delete" on your keyboard under Insert.

"C/P" copy and paste as new layer.

Remove "O/L" Remove original layer.

"D/S" Drop shadow located in 3D effects.

"R/S" Resize layer located in Image.

New "R/L" Raster layer, in Layers.

"outer glow" Gradient glow from eye candy

Or my method on my blog under "How to dos"

Good D/S settings:

0, 0, 57, 6, color black

Good add noise settings:

Uniform- 70-90 % noise monochrome

Random- 10-34% noise monochrome

-----------------------

I used the artwork of Martin Abel

You can find his artwork Here

-----------------------

Open template R/S W-80, H-85

Canvas size set to 600x600

Remove background and copyrights

Select black circle - selections all float deloat

PP5 R/S to 60% C/P onto canvas, Selections - invert

delete select none. Remove original layer

(Since this layer is long. I did this step twice for each side)

Or you can make the paper bigger, but i like it this way

-Apply outer glow to this then add noise, D/S-

Open frame2 R/S to 75% C/P onto canvas, place on top of circle paper

Select black round rectangle - selections all float defloat

PP1 R/S to 60% C/P onto canvas, selections- invert

delete select none, Remove original layer

Select top pink circle - selections all float defloat

PP8 R/S to 60% C/P onto canvas, selections- invert

delete select none, Remove original layer

Select bottom pink circle - selections all float defloat

PP8 R/S to 60% C/P onto canvas, selections- invert

delete select none, Remove original layer

-Apply outer glow to this then add noise, D/S-

REMOVE Blue top/bottom rectangle

Select top maroon rectangle - selections all float defloat

PP4 R/S to 60% C/P onto canvas, selections- invert

delete select none, Remove original layer

Select bottom maroon rectangle - selections all float defloat

PP4 R/S to 60% C/P onto canvas, selections- invert

delete select none, Remove original layer

Select top grey rectangle - selections all float defloat

PP R/S to 60% C/P onto canvas, selections- invert

delete select none, Remove original layer

Select bottom grey rectangle - selections all float defloat

PP5 C/P onto canvas, selections- invert

delete select none, Remove original layer

Open main tube R/S C/P onto canvas place in center

Apply radiance if you want, settings of choice

Apply a thin outer layer, i choose white, then black

Apply noise to the white, and drop shadow to black

Open filmstrip R/S to 60% C/P onto canvas

I placed it down at the bottom near the yellow paper

i erased the other half sticking out, filled with black

Opened my main tube, R/S and placed tube inside the first 2

boxs. changed tube to greyscale then radiance settings of choice

Now it's element time

Elements i used and the resized %

Using this drop shadow: 0, 0, 43, 7, color black

Dagger&Rose - 30%

Rabbit - 30%

Skulls&roses - 50%

Card2 - 20%

Clock - 25%

Heart - 30%

place elements where you want, or use my tag as a guide.

Apply your mask, copyrights,  add your name save as a PNG

You're done!

Thanks for trying my tutorial.

----------------------

This tutorial was written on January 20th, 2016 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Ptu - Dia De Muerta

This tutorial was written in PSP 9 and can be used with any other version. I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Paid Scrap kit by Toxic Desirez

"Dia De Los Muertos2" Purchase at Skullified Scrapz

Font of choice

Habana

Mask of choice

none

Temp310 by Kristin

Toxic Desirez

Plugins Optional:

PhotoEffex - scanlines

xero - radiance

Tutorial shortcut index:

"Delete" on your keyboard under Insert.

"C/P" copy and paste as new layer.

Remove "O/L" Remove original layer.

"D/S" Drop shadow located in 3D effects.

"R/S" Resize layer located in Image.

New "R/L" Raster layer, in Layers.

"outer glow" Gradient glow from eye candy

Or my method on my blog under "How to dos"

Good D/S settings:

0, 0, 57, 6, color black

Good add noise settings:

Uniform- 70-90 % noise monochrome

Random- 10-34% noise monochrome

-----------------------

I used the artwork of Martin Abel

You can find his artwork Here

Tube i used Here

-----------------------

Open template, R/S to 80% canvas size 600x600

remove copyrights, and raster 2

Select raster8, selections- all- float- defloat, open paper8, R/S 60%

C/P onto canvas, selections- invert, delete. select none, remove O/L

Add  drop shadow of choice

Select copyraster8, selections- all- float- defloat, open paper8, 

C/P onto canvas, selections- invert, delete. select none, remove O/L

Add  drop shadow of choice

Select raster7, selections- all- float- defloat, open paper10, R/S 60%

C/P onto canvas, selections- invert, delete. select none, remove O/L

Add an outer glow, add noise then drop shadow of choice

Select copyraster7, selections- all- float- defloat, open paper10, 

C/P onto canvas, selections- invert, delete. select none, remove O/L

Add an outer glow, add noise then drop shadow of choice

Select raster9, selections- all- float- defloat, open paper2, R/S 60%

C/P onto canvas, selections- invert, delete. select none, remove O/L

Add  drop shadow of choice

Select copyraster9, selections- all- float- defloat, open paper2, 

C/P onto canvas, selections- invert, delete. select none, remove O/L

Add  drop shadow of choice

Select raster10, selections- all- float- defloat, open paper4, R/S 60%

C/P onto canvas, selections- invert, delete. select none, remove O/L

Add an outer glow, add noise then drop shadow of choice

Select copyraster10, selections- all- float- defloat, open paper4, 

C/P onto canvas, selections- invert, delete. select none, remove O/L

Add an outer glow, add noise then drop shadow of choice

Select raster6, apply scanlines width at 2 everything at default

Add an outer glow, add noise then drop shadow of choice

Select copyraster6, apply scanlines width at 2 everything at default

Add an outer glow, add noise then drop shadow of choice

Remove layers 5 and copy5, open flame R/S to 50%

Place where the other flames were, using your deform tool

smoosh it down to your liking, hide behind copyraster4

duplicate this new flame and mirror, apply drop shadow

Select raster4, selections- all- float- defloat, open paper3, R/S 60%

While on your paper layer, adjust-brightness/contrast, B -13, C 13

C/P onto canvas, selections- invert, delete. select none, remove O/L

copy of raster4 - reapply add noise apply drop shadow 

Open main tube, resize if needed, turn greyscale place in center

I colorized her eyes orangey red, apply radiance, slight drop shadow

Now it's element time

Elements i used and the resized %

Using this drop shadow: 0, 0, 56, 5, color black

hand - 25%

Bear - 30%

rosary - 30%

Skull&Rose - 30%

Skull2 - 30%

Rose - 25%

Spider - 30%

frame2 - 75%

lips - 25%

Splatter - 60%

place elements where you want, or use my tag as a guide.

Add your copyrights, your name save as a PNG

You're done!

Thanks for trying my tutorial.

Now lets see those results.

----------------------

This tutorial was written on May 2nd, 2015 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Beautiful Fall - PTU

 

 This tutorial was written in PSP 9 and can be used with any other version. I assume that you have a working knowledge of PSP.


-----------------------

Supplies Needed:
Tube of choice/close up

PTU Scrap kit by Polkadot Scraps
 "Fall Days" PMTWS


font of choice

Plugins Optional:

xero - radiance
penta.com - color dot

Code Word: When ever i say "delete" You
are selecting delete on your keyboard under insert.




-----------------------
I am using the art of Martin Abel
You can find his work Here
-----------------------


*easy working with  layers*


Let's your double polaroid picture frames. canvas size 600x600 using your magic wand. click the inside of bth frames. selections- modify- expand by 8. choosing paper of choice. i used paper 11. i resized it down a little bit. copy paste on your canvas. selections- invert-delete. select none. drag below your frame layer.


Opening your tube/close up of choice. Using your magic wand again, while frames are selected click the inside, selections- modify-expand by 8 copying your close up tube of choice. paste on your canvas using your mover tol to drag tube where you want it to go inside the marching ants. once you've got it, selections- invert-delete, select none. drag your tubes below frame layer. above paper. change blend mode to soft light. depending on your liking. i then went to  Adjust- hue and saturation- colorize both dials set at zero.

Now while both tube layers are selected inside your frame. add a radiance and color dot settings of choice. now add a slighty drop shadow to the frame and merge all of these layers together. Now it's time to add your main tube. I placed my tube on one side of the frame. her elbow fit perfect on the side like she was standing inside of the frame. i had to erase some of the tube to get this sort of effect.


Adding slight radiance and drop shadow to your main tube.. Now it's time to add the elements. I used the wordart that came with the kit "Beautiful" , owl 1, acorn, flower 4, frame 4, leaves 1, paper 11, ricrac, scattered leaves 3 and 4, resize these elements down to where you like them placing them where you want, or using my tag as a guide.


Now add your copyrights, add your name and save as a png and  you’re done!


Thanks for trying my tutorial.
Now lets see those results.

----------------------
This tutorial was written on November 18th, 2013 by Melissa.
In no way may this tutorial be copied to another
website without the creators permission. Any resemblance
to this tutorial is purely coincidental.