Ptu - Carnival Girl

This tutorial was written in PSP 9 and can be used with any other version. I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Paid Scrap kit by Toxic Desirez

"Dead Carnival" Purchase at Hania's Design

Font of choice

Thin Design

Mask of choice

I don't remember the name

But i used a WSL_Mask Here

Plugins Optional:

Redpaw media - beautifier

Xero - radiance

Tutorial shortcut index:

"Delete" on your keyboard under Insert.

"C/P" copy and paste as new layer.

Remove "O/L" Remove original layer.

"D/S" Drop shadow located in 3D effects.

"R/S" Resize layer located in Image.

New "R/L" Raster layer, in Layers.

"outer glow" Gradient glow from eye candy

Or my method on my blog under "How to dos"

Good D/S settings:

0, 0, 57, 6, color black

Good add noise settings:

Uniform- 70-90 % noise monochrome

Random- 10-34% noise monochrome

-----------------------

No tubes - Kit only

-----------------------

Open frame 3 R/S to 80% Canvas size 650x50

Duplicate and mirror frame. Select eraser tool

i erased the over lapping frames. so it looks like 1 now

Merge these two frames together now

Open girlie R/S to 36% C/P onto canvas

i placed her in the middle covering any imperfections

This is where you'd place your tube if you wanted. D/S

Select magic wand - click inside frame, selections

modify-expand by 21, Open grass R/S to 60%

C/P onto canvas inside marching ants, drag where you want

selections - invert delete. select none. drag below frame

Open ring of fire - R/S to 45% C/P onto canvas

drag to right side D/S. Open tiger R/S to 38%

C/P onto canvas drag near ring, apply D/S

Open carousel R/S to 40% C/P onto canvas

drag behind all layers i placed it so you can

see it through the ring of fire apply D/S

Open ferriswheel R/S to 30%

C/P onto canvas, again drag to the very bottom

place to the left side, erase anything sticking out

Open tent R/S to 40% C/P onto canvas

drag to the bottom of everything, and behind

the ferriswheel, apply D/S 

Select your frame selections - modify

expand by 21, Open paper 4 R/S to 60%

C/P onto canvas selections - invert, delete none

drag paper layer below everything including frame

Using your dodge tool opacity at 61%

I use brushed it over the paper layer twice

this brightens it up alittle bit so the elements

aren't clashing into the paper.

Apply drop shadow on your frame

Applied noise -  random at 7% monochrome

Now it's element time

Elements i used and the resized %

Using this drop shadow: 0, 0, 50, 7, color black

Skull2 - 22%

Game - 50%

Popcorn bag - 20%

Popcorn - 30%

Cotton candy - 25%

Ball1 - 12%

Mask - 17%

place elements where you want, or use my tag as a guide.

Apply your mask, copyrights,  add your name save as a PNG

I applied beautifier to the whole tag, setting of choice

I used paper 2 for my mask layer 

You're done!

Thanks for trying my tutorial.

----------------------

This tutorial was written on August 21st, 2017 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Ptu - DarKnight

This tutorial was written in PSP 9 and can be used with any other version. I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Paid Scrap kit by Toxic Desirez

"Battastic" Purchase at S&Co

Font of choice

CK Brandy B

Mask of choice

RebelDezignsMask-483

Plugins Optional:

Redpaw media - beautifier

Xero - radiance

Tutorial shortcut index:

"Delete" on your keyboard under Insert.

"C/P" copy and paste as new layer.

Remove "O/L" Remove original layer.

"D/S" Drop shadow located in 3D effects.

"R/S" Resize layer located in Image.

New "R/L" Raster layer, in Layers.

"outer glow" Gradient glow from eye candy

Or my method on my blog under "How to dos"

Good D/S settings:

0, 0, 57, 6, color black

Good add noise settings:

Uniform- 70-90 % noise monochrome

Random- 10-34% noise monochrome

-----------------------

I used the artwork of Ismael Rac

Tube of choice i used "2013Tough Attitude"

He's now at S&Co so search for the tube there

Or choose something else. Website & Tubes

-----------------------

Open a 650x50 canvas comic frame R/S to 85% 

Open tube of choice R/S % of choice, C/P onto canvas

Drag where you want you might need to change it later

Duplicate tube mirror turn to greyscale

Place two so you see the face but tubes back to back

I also colorized my tube to kit the scrapkit, do this if you like

Duplicate your frame and now drag above your tube layers

Now i went and erased parts of the frame/tube so it looked

like her and her "shadow twin" was coming out of parts of the comic

You might need to move your tube to fit perfectly like i did

Select the frame thats in 1 piece (original) 

Using magic wand click inside the two middle frames

Selections - modify - expand by 6

Open city R/S to 45% C/P onto canvas

drag below frame, but in the middle of marching ants

C/P as many times as you need to fill them i did 2

Selections - invert - delete (on each layer)

selections none, apply D/S

Using magic wand click inside top right frame

selections - modify - expand by 6

Open Background R/S to 35% C/P onto canvas

Using mover tool drag inside your marching ants

selections - invert - delete select none

drag below frame and any tube sticking out

Click inside the bottom two frames

selections - modify - expand by 6

Open paper3 R/S to 65% C/P onto canvas

using mover tool drag inside marching ants

selections - invert delete. select none drag below frame

Now back to frame, click inside the two middle frames

selections - modify - expand by 6

Open paper5 R/S to 80% C/P onto canvas

drag paper inside marching ants, selections - invert 

delete. select none, drag below frame layer

Since we put the city in this section make sure you

drag your paper below that element too

One more time, select frame. click inside top left frame

selections - modify - expand by 6

Open paper 6 R/S to 80% C/P onto canvas

drag inside ants, selections - invert - delete select none

drag paper layer below your frame layer

Now it's element time

Elements i used and the resized %

Using this drop shadow: 0, 0, 50, 7, color black

Car - 60%

Bats - 50%

Light - 35%

Lightbeam - 40%

Sound FX1 - 30%

Silhouette - 40%

Cuppy - 20%

Bomb - 20%

Bat - 20%

Mask - 25%

Glasses - 15%

Mouth - 15%

Smoke - 25%

Thought Bubble - 20%

Joker - 25%

Knuckles - 15%

Gun - 12%

Bullethole - 20%

place elements where you want, or use my tag as a guide.

Apply your mask, copyrights,  add your name save as a PNG

I applied beautifier to the whole tag, setting of choice

I used paper 11 for my mask layer 

You're done!

Thanks for trying my tutorial.

----------------------

This tutorial was written on June 21st, 2017 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Ptu - Wolf Vs Redriding Hood

This tutorial was written in PSP 9 and can be used with any other version. I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Paid Scrap kit by Toxic Desirez

"Dead RidingHood" Purchase at Skullified Scrapz

Font of choice

AnneBoleynSH

Plugins Optional:

Redpaw media - beautifier

xero - radiance

Tutorial shortcut index:

"Delete" on your keyboard under Insert.

"C/P" copy and paste as new layer.

Remove "O/L" Remove original layer.

"D/S" Drop shadow located in 3D effects.

"R/S" Resize layer located in Image.

New "R/L" Raster layer, in Layers.

"outer glow" Gradient glow from eye candy

Or my method on my blog under "How to dos"

Good D/S settings:

0, 0, 57, 6, color black

Good add noise settings:

Uniform- 70-90 % noise monochrome

Random- 10-34% noise monochrome

-----------------------

I used the artwork of OrkusArt

You can find his artwork HERE 

Tube i used can be found Here

This tube was a prepaid project

-----------------------

Open arch R/S to 55% set canvas 650x650

Drag arch to left hand side kinda in the middle

Adjust - hue/sat - colorize - greyscale

Click inside arch, selections - all float deloat

modify - expand by 5 Open paper 1 R/S to 60%

C/P onto canvas, selections - invert - delete. select none

drag your paper layer below arch

Open grass R/S to 66% C/P onto canvas on top of arch but near bottom 

Duplicate this grass and place it above and below the other grass

Open tree 2 R/S to 40% C/P onto canvas cover the harsh cut on the side of arch

Duplicate trees mirror and place the tree right next to the other tree D/S

After my tag you can see i duplicated this and spread it all over the bckground

Open tube R/S to 38% or percentage of choice, sharpen tube

then C/P onto canvas drag on the other sde of arch

apply radiance then drop shadow of choice

Now it's element time

Elements i used and the resized %

Using this drop shadow: 0, 0, 66, 7, color black

Blood - 20%

Cape - 25%

Castle - 40%

Tree 1 - 45%

Moon - 15%

Basket  - 20%

Apples - 15%

Skull2 - 15%

Splatter - 30%

Bone - 20%

Potion - 15%

Cauldron - 25%

Butterfly - 15%

Wolf - 30%

Web - 25%

Trees - 60%

Shrooms - 15%

Raven - 20%

Moutain - 40%

place elements where you want, or use my tag as a guide.

Apply your copyrights, add your name save as a PNG

I applied beautifier to the whole tag, setting of choice

You're done!

Thanks for trying my tutorial.

----------------------

This tutorial was written on April 7th, 2017 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Ptu - Watermelon Patch

This tutorial was written in PSP 9 and can be used with any other version. I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Paid Scrap kit by Toxic Desirez

"Watermelon Blast" Purchase at Skullified Scrapz

Mask of choice by Dee:

DD_VMask_7

Font of choice

Watermelon Script

Plugins Optional:

Redpaw media - beautifier

xero - porcelain

xero - radiance

Tutorial shortcut index:

"Delete" on your keyboard under Insert.

"C/P" copy and paste as new layer.

Remove "O/L" Remove original layer.

"D/S" Drop shadow located in 3D effects.

"R/S" Resize layer located in Image.

New "R/L" Raster layer, in Layers.

"outer glow" Gradient glow from eye candy

Or my method on my blog under "How to dos"

Good D/S settings:

0, 0, 57, 6, color black

Good add noise settings:

Uniform- 70-90 % noise monochrome

Random- 10-34% noise monochrome

-----------------------

I used the artwork of Arthur Crowe

You can find his artwork HERE 

Tube i used can be found Here

-----------------------

Open canvas size 660x660

Open grass R/S to 60% C/P onto canvas

Duplicate several times to make a bit of a grass scene 

near the bottom of your canvas as close to the bottom as you wanr

Open tube R/S to 62% or your own settings if you're

using a different tube than the one i'm using

Apple two different drop shadows

0, 0, 44, 5 & 0, 6, 44, 5

Aplly radiance, 109, 50, 128, 33

Or settings of choice, depends on the tube you use

Zoom in on your tube, with burn tool selected

Opacity at 71% i just made her outfit darker to match the 

darker watermelon in this kit. this is optional

Open frame R/S to 80% C/P onto canvas

drag to the right and under any grass layers

duplicate grass and slide the other to the left

behind grass, then drag it below the first frame, and now

with your eraser tool erase the lopped frame that's in the way

Hide all - but frame - merge - now unhide everything again

Using magic wand click inside frame, selections

modify - expand by 9. Open pp12 R/S to 80%

C/P onto canvas, selections - indert, delete select none

Now drag this paper below your frame

Now i went back and did this step again

but then i C/P close up tube of choice

I added D/S, radiance, and porcelain

D/S and radiance settings above. 

Porcelain: 50, 79, 128, 0, 0, 255

Now it's element time

Elements i used and the resized %

Using this drop shadow: 0, 0, 60, 8, color black

Sign - 40%

Leaves - 30%

Leaf2 - 20%

Seeds - 25%

Flower 3 - 30%

Ice Cream 25%

Cuppy - 18%

Watermelon2 - 20%

Watermelon1 - 20%

Watermelone slice3 - 15%

Watermelon slice2 - 17%

Watermelone slices - 15%

Mushrooms - 20%

Butterfly - 20%

place elements where you want, or use my tag as a guide.

Apply your mask, copyrights,  add your name save as a PNG

I applied beautifier to the whole tag, setting of choice

I used both of these papers with the same mask, 2&3

Put kept paper2 on top it just made it deeper in color

You're done!

Thanks for trying my tutorial.

----------------------

This tutorial was written on March 7th, 2017 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Ptu - Kiss Me Froggie

This tutorial was written in PSP 9 and can be used with any other version. I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Paid Scrap kit by Toxic Desirez

"Froggie Wuv" Purchase at Skullified Scrapz

Mask of choice:

WSL_Mask352

Font of choice

Carpenter Script

Plugins Optional:

Redpaw media - beautifier

PhotoEffex - scanlines

xero - radiance

Tutorial shortcut index:

"Delete" on your keyboard under Insert.

"C/P" copy and paste as new layer.

Remove "O/L" Remove original layer.

"D/S" Drop shadow located in 3D effects.

"R/S" Resize layer located in Image.

New "R/L" Raster layer, in Layers.

"outer glow" Gradient glow from eye candy

Or my method on my blog under "How to dos"

Good D/S settings:

0, 0, 57, 6, color black

Good add noise settings:

Uniform- 70-90 % noise monochrome

Random- 10-34% noise monochrome

-----------------------

I used the artwork of Arthur Crowe

You can find his artwork HERE 

Tube i used can be found Here

-----------------------

Open canvas size 650x650

Open ribbon R/S to 30% C/P onto canvas

Drag to the middle right side - duplicate - mirror

duplicate again and flip make sure points are touching

duplicate - mirror - points touching once more

you should have an incomplete rectangle with gaps in center

Open candy string R/S to 60% C/P onto top of the gap

Open cupcake R/S to 50% C/P onto canvas drag in the middle

Open candy1 R/S to 40% C/P onto canvas drag left of cupcake

Open candy2 R/S to 40% C/P onto canvas drag bottom of cupcake

Open ring pop R/S to 30% C/P onto canvas mirror, put left side behind kiss me 

Open Flower3 R/S to 40% C/P onto canvas place behind cupcake on right side

Open wordart C/P onto canvas drag below everything (including mask)

Add noise then just apply a drop shadow of choice

Now place a black background inside the frame

Either merge all layers using your magic wand click inside frame

Flood fill color black. Open tube of choice C/P inside each frame

lower opacity down settings of choice. apply radiance to tubes

Apply scanlines to tube and black background. default settings

Open your main tube R/S down to a very smaller size

C/P onto canvas, i dragged in front of cupcake D/S

added radiance to my tube, then beautifier to my whole tag

Add your mask - copyrights, name, save as a PNG and you're done!

Thanks for trying my tutorial.

----------------------

This tutorial was written on February 21st, 2017 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Ptu - Bombs Away

This tutorial was written in PSP 9 and can be used with any other version. I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Paid Scrap kit by Toxic Desirez

"Bombs Away" Purchase at Hania's Design

Temp396 by Kristin

Grab @ her blog Here

3rd template down

WSL_Mask302

Font of choice

Broken Glass

Plugins Optional:

Redpaw media - beautifier

PhotoEffex - scanlines

xero - radiance

Tutorial shortcut index:

"Delete" on your keyboard under Insert.

"C/P" copy and paste as new layer.

Remove "O/L" Remove original layer.

"D/S" Drop shadow located in 3D effects.

"R/S" Resize layer located in Image.

New "R/L" Raster layer, in Layers.

"outer glow" Gradient glow from eye candy

Or my method on my blog under "How to dos"

Good D/S settings:

0, 0, 57, 6, color black

Good add noise settings:

Uniform- 70-90 % noise monochrome

Random- 10-34% noise monochrome

-----------------------

I used the artwork of Martin Abel

You can find his artwork HERE 

Tube i used can be found Here

-----------------------

Open template R/S to W: 72% , H 80%

Canvas size set to 650x650

Remove these layers: 13, 5, 4, 7 & copy7

Open tube of choice, R/S if needed

C/P onto canvas, drag in center apply D/S

i used a regular shadow then i used this

-1, -8, 67, 5 color black. or settings of choice

I also applied slight radiance to tube and sharpened

Select raster11  selections all float defloat. open pp1

R/S to 80% C/P onto canvas, invert - delete, select none

apply gradient glow of choice - add noise - drop shadow

Do the same step for copy of raster 11

Select raster8  selections all float defloat. open pp7

R/S to 80% C/P onto canvas, invert - delete, select none

apply gradient glow of choice - add noise - drop shadow

Do the same step for copy of raster 8

Select raster3  selections all float defloat. open pp4

R/S to 80% C/P onto canvas, invert - delete, select none

apply gradient glow of choice - add noise - drop shadow

Do the same step for copy of raster 3

Select raster9  selections all float defloat. open pp12

R/S to 80% C/P onto canvas, invert - delete, select none

apply gradient glow of choice - add noise - drop shadow

Do the same step for copy of raster 9

Select raster10  selections all float defloat. open pp11

R/S to 80% C/P onto canvas, invert - delete, select none

apply gradient glow of choice - add noise - drop shadow

Do the same step for copy of raster 10

Select raster2  selections all float defloat. open 2 pp's 3 & 5

R/S to 80% C/P onto canvas, invert - delete, select none

Do for both papers, delete on each layer too, then using selection tool

divide the circle in half and delete on the side of the paper you want on that side

apply gradient glow of choice - add noise - drop shadow

Open gear R/S to 40% C/P onto canvas, drag on top of the layer 6

Remove layer 6 now place this gear there, do the same for the bottom

Open frame2 R/S to 40% i turned this greyscale

C/P onto canvas, drag above circle layers in the background

duplicate and mirror - flip so the bottom is matching - D/S

Select raster 12 selections all float defloat - open tube of choice

C/P onto canvas, drag inside marching ants - insert - delete, select none

Turn tube greyscale, apply slight radiance - settings of choice

lower opacity down to 54% or settings of choice

Apply PhotoEffex - scanlines - i used default settings

apply outer glow - add noise - drop shadow 

Now it's element time

Elements i used and the resized %

Using this drop shadow: 0, 0, 61, 6, color black

Gun - 40%

Bullets - 20%

Skull1 - 20%

Bullet Holes - 40%

Gas Mask - 25%

Cuppy - 20%

Bomb2 - 25%

Bomb1 - 20%

Bomb3 - 20%

Skull3 - 20%

Blood - 45%

place elements where you want, or use my tag as a guide.

Apply your mask, copyrights,  add your name save as a PNG

I applied beautifier to the whole tag, setting of choice

You're done!

Thanks for trying my tutorial.

----------------------

This tutorial was written on February 20th, 2017 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Ptu - Fly With Me

This tutorial was written in PSP 9 and can be used with any other version. I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Paid Scrap kit by Toxic Desirez

"Fly With Me" Purchase at Skullified Scrapz

Temp419 by Kristin

Grab @ her blog Here

Snags from this tag - Here

Gradient of choice

I just made my own

Font of choice

CK Brandy B

Plugins Optional:

Redpaw media - beautifier

xero - radiance

Tutorial shortcut index:

"Delete" on your keyboard under Insert.

"C/P" copy and paste as new layer.

Remove "O/L" Remove original layer.

"D/S" Drop shadow located in 3D effects.

"R/S" Resize layer located in Image.

New "R/L" Raster layer, in Layers.

"outer glow" Gradient glow from eye candy

Or my method on my blog under "How to dos"

Good D/S settings:

0, 0, 57, 6, color black

Good add noise settings:

Uniform- 70-90 % noise monochrome

Random- 10-34% noise monochrome

-----------------------

I used the artwork of Barbara Jensen

You can find her artwork HERE 

Tube i used can be found Here

-----------------------

Open template R/S to 88% Cnvas size 650x650

Remove credits, layers 11 & copy, 2, 4 & copy, 5 & copy

Open runwayh R/S to 65% C/P onto canvas 

drag down to the bottom as far as you want

Now is the time to choose your tube R/S if needed

C/P onto canvas tube should be in the middle

of up closer to the smaller part of the run way

D/S both and just go ahead and hide to work on the temp

Apply radiance and drop shadow to your tube

Select raster 8 - selections all float defloat, Open pp10

R/S to 80% C/P onto your canvas drag where you want

 inside marching ants. selections - invert - delete, select none.

Apply any outer glow you want - add noise D/S

Do the same for copy of raster 8

Select raster 10  - selections all float defloat, Open pp 6

R/S to 80% C/P onto your canvas drag where you want

 inside marching ants. selections - invert - delete, select none.

Apply any outer glow you want - add noise D/S

Do the same for copy of raster 10

Select raster9  - selections all float defloat, Open pp8

R/S to 80% C/P onto your canvas 

selections - invert - delete, select none.

Apply any outer glow you want - add noise D/S

Do the same for copy of raster 9

Select raster 7 - selections all float defloat, Open pp7

R/S to 80% C/P onto your canvas 

 selections - invert - delete, select none.

Apply any outer glow you want - add noise D/S

Do the same for copy of raster 7

Close out of all of your layers but your pink circles

MERGE. - unhide everything, Now selections all float defloat

Add new raster layer - flood fill gradient of choice

I made my own with the colors from the suitcase

Now open clouds 1, 2 and the heart clouds

R/S cloud1 to 40%, cloud2 50% heart cloud 30%

C/P clouds onto canvas, using move tool drag

inside marching ants where you want - selections invert

delet (on each cloud layer) select none.

Open Boy & plane R/S 20% to C/P onto canvas

Place him inside the right hand circle R/S

Open sun R/S to 30% C/P onto canvas on the left circle

drag behind your cloud layers

Now it's element time

Elements i used and the resized %

Using this drop shadow: 0, 0, 68, 7, color black

Sign - 30%

Tree - 40%

Control Tower - 50%

Bow - 40%

Light - 30%

Suitcase - 30%

Tickets - 20%

Coffee - 15%

Grass - 80%

Mountains - 40%

Propeller - 25%

Plane2 - 50%

Butterfly - 20%

place elements where you want, or use my tag as a guide.

Apply your copyrights,  add your name save as a PNG

I applied beautifier to the whole tag, setting of choice

You're done!

Another tube choice for this kit

Thanks for trying my tutorial.

----------------------

This tutorial was written on January 30th, 2017 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Ptu - Love Is Tainted

This tutorial was written in PSP 9 and can be used with any other version. I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Paid Scrap kit by Toxic Desirez

"Love Is Tainted" Purchase at Skullified Scrapz

Wordart by me - Here

Snags from this tag- Here

Temp417 by Kristin

Grab @ her blog Here

6th template down

Gradient of choice

Mine is from Fiona's Place
Grab Here i used Fipinkgrey
(Thank you lori)

Font of choice

Chops chops

Plugins Optional:

Redpaw media - beautifier

xero - radiance

Tutorial shortcut index:

"Delete" on your keyboard under Insert.

"C/P" copy and paste as new layer.

Remove "O/L" Remove original layer.

"D/S" Drop shadow located in 3D effects.

"R/S" Resize layer located in Image.

New "R/L" Raster layer, in Layers.

"outer glow" Gradient glow from eye candy

Or my method on my blog under "How to dos"

Good D/S settings:

0, 0, 57, 6, color black

Good add noise settings:

Uniform- 70-90 % noise monochrome

Random- 10-34% noise monochrome

-----------------------

I used the artwork of Elias Chatzoudis

You can find his artwork HERE 

Tube i used can be found Here

-----------------------

Open temp R/S 85% Cnvas size 650x650

Remove credits and these layers, 3, 4, 10 and copy of 10

Open tube C/P onto canvas, drag off to the right side

apply drop shadow, and duplicate tube

Select layer 4, selections all float defloat - invert

select back on your main tube hit delete

select none. go back to your duplicate (copy raster)

erase any parts of the tube you don't want to see 

Select layer 4 selections all float defloat

C/P close up tube of choice - mirror first

C/P inti marching ants, drag inside where you want

select invert - delete. select none. turn tube grey scale

apply radiance on both main tube and inside rectangle

and apply scan lines on tube inside rectangle

Select raster 9, selections all float defloat

Open paper3, R/S to 80% C/P onto canvas

selections - invert - delete. select none

do the same for copy of raster 9 - outer glow of choice

Select copy of raster 4. selections all float defloat

add new raster layer flood fill gradient of choice

Selections none. remove temp layer add noise D/S

Select raster 8 selections all float defloat, open paper5

R/S to 60% C/P onto canvas, selections invert - delete, select none

do the same for copy of raster 8 - then apply outer glow on both

choose to add noise then D/S or just drop shadow

Select raster 7 selections all float defloat, open paper11

R/S to 60% C/P onto canvas, selections invert - delete, select none

do the same for copy of raster 7 - then apply outer glow on both

choose to add noise then D/S or just drop shadow

Select raster 6 selections all float defloat, open paper4

R/S to 60% C/P onto canvas, selections invert - delete, select none

do the same for copy of raster 6 - then apply outer glow on both

choose to add noise then D/S or just drop shadow

Select raster 2 selections all float defloat, open paper

R/S to 60% C/P onto canvas, selections invert - delete, select none

then apply outer glow on both if you want, add noise D/S

Now it's element time

Elements i used and the resized %

Using this drop shadow: 0, 0, 58, 5, color black

Skull&Roses - 50%

Rose - 40%

Skull Hand - 30%

Heart - 20%

Potion - 25%

Blood - 30%

Hearts - 30%

Barbed Heart - 25%

Key - 20%

Bottle - 25%

Sparkles - 60%

Raven - 20%

Skull1 - 15%

place elements where you want, or use my tag as a guide.

Apply your copyrights,  add your name save as a PNG

I applied beautifier to the whole tag, setting of choice

You're done!

Thanks for trying my tutorial.

----------------------

This tutorial was written on January 24th, 2017 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Ptu - Arrow Of Love

This tutorial was written in PSP 9 and can be used with any other version. I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Paid Scrap kit by Toxic Desirez

"Sweet On You" Purchase at Hania's Design

Wordart by me - Here

Temp70 by Melissaz Creations

Grab @ her blog Here

Mask of choice

WSL_Mask352

Gradients of choice

I used mine from Tonya

Grab them Here

I used NY4 & 6

Font of choice

AnneBoleynSH

Plugins Optional:

Redpaw media - beautifier

xero - radiance

Tutorial shortcut index:

"Delete" on your keyboard under Insert.

"C/P" copy and paste as new layer.

Remove "O/L" Remove original layer.

"D/S" Drop shadow located in 3D effects.

"R/S" Resize layer located in Image.

New "R/L" Raster layer, in Layers.

"outer glow" Gradient glow from eye candy

Or my method on my blog under "How to dos"

Good D/S settings:

0, 0, 57, 6, color black

Good add noise settings:

Uniform- 70-90 % noise monochrome

Random- 10-34% noise monochrome

-----------------------

I used the artwork of Alehandra Vanhek

You can find her artwork HERE

Tube i used was an Exclusive HERE

-----------------------

Open temp canvas size 650x650 - remove credits

Open tube of choice, R/S, C/P onto canvas

apply radiance on tube then apply drop shadow

Select promoted selections. all float defloat

add new raster layer, select gradient of choice

Using paint bucket flood fill. select none, remove O/L

Select all float defloat modify-expand by 2

add new raster, flood fill your 2nd gradient

select none. drag below your xoxo layer

Add noise - then apply drop shadow

select raster 2, selections all float defloat

Open paper11 R/S to 60% C/P onto canvas

selections invert - delete. select none. remove O/L

do the same step for raster 5. apply your outer glow of choice

Select raster 3 selections all float defloat

Open paper9 R/S to 60% C/P onto canvas

selections - invert - delete. select none remove O/L

Select raster 4 selections all float defloat, open paper 7

C/P onto canvas, selections - invert, delete . select none. remove O/L

Now it's element time

Elements i used and the resized %

Using this drop shadow: 0, 0, 57, 5, color black

Gift - 30%

Ring - 25%

Clock - 30%

Lips - 25%

Flower3 - 30%

Cloud - 30%

Bottle Of Hearts - 25%

Potion - 25%

Arrow - 20%

Cupid - 15%

Candle - 20%

Balloon - 50%

place elements where you want, or use my tag as a guide.

Apply your mask, copyrights,  add your name save as a PNG

I applied beautifier to the whole tag, setting of choice

You're done!

Thanks for trying my tutorial.

----------------------

This tutorial was written on January 13th, 2017 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.

Ptu - Naughty Or Nice?

This tutorial was written in PSP 9 and can be used with any other version. I assume that you have a working knowledge of PSP.

-----------------------

Supplies Needed:

Tube of choice/close up

Paid Scrap kit by Toxic Desirez

"Santas Christmas fun" Purchase at Hania's Designs

Freebie Add On @ her blog, Here

Don't forget to leave some love

Wordart by me - Here

Temp2 by Melissaz Creations

Grab @ Creative Chicks blog Here

Mask of choice

WSL_Mask302

Font of choice

Bellerose

Plugins Optional:

Redpaw media - beautifier

xero - radiance

Tutorial shortcut index:

"Delete" on your keyboard under Insert.

"C/P" copy and paste as new layer.

Remove "O/L" Remove original layer.

"D/S" Drop shadow located in 3D effects.

"R/S" Resize layer located in Image.

New "R/L" Raster layer, in Layers.

"outer glow" Gradient glow from eye candy

Or my method on my blog under "How to dos"

Good D/S settings:

0, 0, 57, 6, color black

Good add noise settings:

Uniform- 70-90 % noise monochrome

Random- 10-34% noise monochrome

-----------------------

I used the artwork of Elias Chatzoudis

You can find his artwork HERE 

Tube i used can be found HERE

-----------------------

Open temp R/S to 95% canvas size 650x650

Remove these layers: 6, 7, copy7, 3, 1

Select merged (rectangles), selections all float defloat

Open paper13  R/S to 80% C/P onto canvas, drag into selection

 selections invert - delete. select none

on raster 7 i just colorized then applied D/S

Select merged (3 stripes), selections all float defloat

Open paper11  R/S to 80% C/P onto canvas, drag into selection

 selections invert - delete. select none

apply outer glow of choice -  D/S

Select raster 8, selections all float defloat

Open paper6  R/S to 80% C/P onto canvas, drag into selection

 selections invert - delete. select none

apply outer glow of choice - add noise -  D/S

 Select raster4, selections all float defloat

Open paper3  R/S to 80% C/P onto canvas, drag into selection

 selections invert - delete. select none

on raster 5 i colorized - add noise again - D/S

Select merged (3 circles), selections all float defloat

Open paper10  R/S to 80% C/P onto canvas, drag into selection

 selections invert - delete. select none

remove raster 2. apply your own glow - add noise - D/S

Open tube of choice, C/P onto canvas leave in the middle

if she's standing up drag alittle closer to the bottom

drop shadow, apply radiance both settings of choice

I clicked inside the front circles, R/S the close up 

placed tube inside half the circle. turn grey scale

apply radiance then drop shadow of choice

duplicate and mirror. then place in the middle if you want

even though you won't really see it

Now it's element time

Elements i used and the resized %

Using this drop shadow: 0, 0, 66, 5, color black

Frame3 - 37%

Sack - 30%

Elf - 25%

Sign - 40%

Deer - 40%

Cuppy - 30%

Lights - 80%

Sparkles - 50%

Bear in stocking - 25%

Candy Canes - 25%

Tree - 60%

place elements where you want, or use my tag as a guide.

Apply your mask, copyrights,  add your name save as a PNG

I applied beautifier to the whole tag, setting of choice

You're done!

Thanks for trying my tutorial.

----------------------

This tutorial was written on January 11th, 2017 by Melissa.

In no way may this tutorial be copied to another

website without the creators permission. Any resemblance

to this tutorial is purely coincidental.